B-Line Eaton series free standing enclosure accessories, 4X rating, Brushed, Used to mount panels in upper or lower sections, Steel, Full and half pa

The AF6024HP half panel measures 24.75 x 24.75 x 19.87 inches per the published height, depth and width figures, and it is built for Eaton B-Line free standing enclosures. It mounts in either the upper or lower section of the enclosure, so two of them can stack to fill a bay. Check your enclosure's internal panel mounting dimensions against those numbers before you order.

It carries a NEMA 4X rating and is UL Listed, so it suits enclosures used in washdown, corrosive or wet duty areas. The rating belongs to the enclosure system it mounts into; the panel itself is the internal mounting plate, not the sealing element.

Steel, 12 gauge, with a brushed finish. At 28 lb for the panel alone it is a heavy plate meant to carry mounted electrical components such as breakers, drives and terminal blocks. Plan a two-person lift when setting it into the enclosure.

A half panel like the AF6024HP fills one section of a free standing enclosure, upper or lower, which lets you split a tall enclosure into two mounting zones, for example power gear low and controls high. A full panel covers the whole interior in one plate and is the pick when you are mounting a single large assembly or a long DIN rail run that cannot be broken across a seam. Two half panels also handle far easier than one full-height plate during install.

Order by manufacturer part number AF6024HP from Eaton B-Line. That is the brushed steel half panel for free standing enclosures, mounted in the upper or lower section.

The AF6024HP is supplied as the steel panel itself. Panel mounting studs, brackets or collar studs inside the free standing enclosure are separate items, so confirm your enclosure already has its panel mounting provisions before scheduling the install.