You may also like
B-Line Eaton series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 2" Channel size, Mill-galvanized, Grip Strut, 10
Model: BLN-52010 10 GL
Eaton B-Line series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 2" Channel size, Mill-galvanized, Grip Strut, 10 gauge
B-LINE
$3,199.15
B-Line Eaton series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 3" Channel size, Mill-galvanized, Grip Strut, 10
Model: BLN-53010 10 GL
Eaton B-Line series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 3" Channel size, Mill-galvanized, Grip Strut, 10 gauge
B-LINE
$3,402.70
B-Line Eaton series Grip Strut five diamond plank, 144" Grating length, 11.75" Grating width, Steel, 4" Channel size, Mill-galvanized, Grip Strut, 10
Model: BLN-54010 12 GL
Eaton B-Line series Grip Strut five diamond plank, 144" Grating length, 11.75" Grating width, Steel, 4" Channel size, Mill-galvanized, Grip Strut, 10 gauge
B-LINE
$4,352.61
B-Line Eaton series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 3" Channel size, Mill-galvanized, Grip Strut, 12
Model: BLN-53012 10 GL
Eaton B-Line series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 3" Channel size, Mill-galvanized, Grip Strut, 12 gauge
B-LINE
$1,077.13
B-Line Eaton series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 1
Model: BLN-52510 10 GL
Eaton B-Line series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 2.5" Channel size, Mill-galvanized, Grip Strut, 10 gauge
B-LINE
$3,311.10
Eaton B-Line series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 4" Channel size, Mill-galvanized, Grip Strut, 10 gauge
Manufacturer Resources
Product Specs
- Channel Size:
- 4"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 10 gauge
- Product Height:
- 4 in
- Product Length Depth:
- 120 in
- Product Weight:
- 16.4 lb
- Product Width:
- 11.75 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
- Product Length:
- 120 in
- Application:
- Safe, sturdy footing where non-slip is required
B-LINE 54010 10 GL – Frequently Asked Questions
1) Is this Grip Strut plank OSHA compliant for a work platform walkway?
Yes. The five diamond Grip Strut plank is listed as OSHA compliant and is intended for safe, sturdy footing where non-slip surface is required, which is the usual reason it gets specified for elevated platforms, catwalks and equipment access walkways.
2) Will mill-galvanized Grip Strut hold up outdoors or in a wet plant area?
The plank is steel with a mill-galvanized finish, which is zinc coating applied to the coil before forming. That handles typical damp and general industrial exposure, but the cut edges and punched openings are bare steel where the plank is sheared. For sustained outdoor salt or washdown chemical exposure, specify a hot-dip galvanized-after-fabrication or stainless plank instead.
3) How heavy is a single 10 foot Grip Strut plank for a two-man install?
16.4 lb per 120 inch plank. One person can carry and set a length, which is part of why these get used for elevated catwalk and mezzanine runs where you are handing material up a ladder rather than craning grating panels into place.
4) What is the difference between five diamond Grip Strut plank and a plain bar grating walkway?
Grip Strut is a single piece of steel formed with punched diamond openings whose raised, serrated edges bite into a boot sole from any direction, so it drains and sheds debris and stays slip resistant when wet or oily. Bar grating is welded bar stock with a flat or serrated top and open rectangular bearing spaces. The five diamond plank is the wider tread version, 11.75 inches across with a 4 inch channel, and it is what you use where OSHA non-slip footing is the driver rather than heavy point-load rolling traffic.
5) Does the Grip Strut plank come with clips or fasteners to attach it to the support steel?
No mounting hardware is part of the plank. What ships is the formed 10 gauge steel plank itself, mill-galvanized, 120 inches long. Plan on ordering hold-down clips, saddle washers or self-drilling screws separately to fix it to your beams or channel supports.
6) Can Grip Strut plank be cut to length in the field?
Yes, the plank is a formed steel section and gets cut on site with a chop saw or band saw to fit between supports. Cut ends expose bare steel on a mill-galvanized part, so hit them with a cold galvanizing compound if the walkway sees any moisture.
How fast can I get the B-LINE 54010 10 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 54010 10 GL come with a warranty?
Absolutely. The B-LINE 54010 10 GL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 54010 10 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 54010 10 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.