You may also like
B-Line Eaton series Grip Strut six diamond plank, 120" Grating length, 30" Grating width, Steel, 5" Channel size, Mill-galvanized, Grip Strut
Model: BLN-65010 10 GL P
Eaton B-Line series Grip Strut six diamond plank, 120" Grating length, 30" Grating width, Steel, 5" Channel size, Mill-galvanized, Grip Strut
B-LINE
$5,190.57
B-Line Eaton series Grip Strut six diamond plank, 288" Grating length, 30" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
Model: BLN-65010 24 GL
Eaton B-Line series Grip Strut six diamond plank, 288" Grating length, 30" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
B-LINE
$12,201.99
B-Line Eaton series Grip Strut six diamond plank, 240" Grating length, 30" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
Model: BLN-65010 20 GL
Eaton B-Line series Grip Strut six diamond plank, 240" Grating length, 30" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
B-LINE
$10,168.96
B-Line Eaton series Grip Strut six diamond plank, 144" Grating length, 30" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
Model: BLN-65010 12 GL
Eaton B-Line series Grip Strut six diamond plank, 144" Grating length, 30" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
B-LINE
$6,102.91
B-Line Eaton series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
Model: BLN-55010 10 GL
Eaton B-Line series Grip Strut five diamond plank, 120" Grating length, 11.75" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
B-LINE
$4,575.26
Eaton B-Line series Grip Strut six diamond plank, 120" Grating length, 30" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 5"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 10 gauge
- Product Height:
- 5 in
- Product Length Depth:
- 120 in
- Product Weight:
- 19.9 lb
- Product Width:
- 30 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
B-LINE 65010 10 GL – Frequently Asked Questions
1) Is this Grip Strut plank OSHA compliant for a work platform walking surface?
Yes. The six diamond Grip Strut plank is listed as OSHA compliant, and the serrated diamond openings are the non-slip surface that gets it there. It is intended for safe, sturdy footing anywhere a non-slip walking surface is required, such as catwalks, mezzanine walkways, and equipment platforms.
2) Will galvanized Grip Strut hold up outdoors or in a wet plant area?
The plank is steel with a mill-galvanized finish, which is the usual choice for damp and outdoor walkways, wash-down areas, and unheated structures. Mill-galvanized means the coating was applied to the coil before forming, so cut and punched edges are bare steel. In a corrosive chemical environment or constant salt spray, a hot-dip galvanized or stainless product is the better call.
3) What does 10 gauge mean on this Grip Strut plank versus a lighter gauge?
10 gauge is the steel thickness of the formed sheet, and it is the heavier end of the plank range. Heavier gauge buys you more load capacity and a longer clear span between supports for the same 5 inch channel depth. Lighter gauges in the same profile cost less and weigh less but need supports closer together, so the gauge choice usually follows the support spacing already in your structure.
4) What is the difference between six diamond Grip Strut plank and a two or four diamond section?
The diamond count is how many rows of the serrated diamond openings run across the width of the piece. Six diamond gives the 30 inch walking width here, which is a full walkway or platform width. Two and four diamond versions of the same profile are narrower and are used for stair treads, ladder rungs, and catwalk edges. If you are decking a platform, you want the wide six diamond plank; for stairs, order the tread width that matches your stringer.
5) Can I cut this plank down to length on site?
Yes, plank is routinely field cut with a metal chop saw or band saw to suit an opening. Bear in mind the mill-galvanized coating stops at the cut, so touch the raw edge with a zinc-rich cold galvanizing compound if the walkway sees weather. Cutting also shortens the effective span, so re-check that both cut ends still land on support steel.
6) What part number do I order for the 10 gauge galvanized 30 inch Grip Strut plank?
Order Eaton B-Line part number 65010 10 GL. That number covers the six diamond plank, 120 inch length, 30 inch width, 5 inch channel, 10 gauge steel, mill-galvanized.
How fast can I get the B-LINE 65010 10 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 65010 10 GL come with a warranty?
Absolutely. The B-LINE 65010 10 GL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 65010 10 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 65010 10 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.