You may also like
B-Line Eaton series Grip Strut six diamond plank, 120" Grating length, 30" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
Model: BLN-65010 10 GL
Eaton B-Line series Grip Strut six diamond plank, 120" Grating length, 30" Grating width, Steel, 5" Channel size, Galvanized, Grip Strut, 10 gauge
B-LINE
$5,084.49
B-Line Eaton series Grip Strut eight diamond plank, 120" Grating length, 18.75" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut,
Model: BLN-81512F 10 GL
Eaton B-Line series Grip Strut eight diamond plank, 120" Grating length, 18.75" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 12 gauge
B-LINE
$1,414.77
B-Line Eaton series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 4.5" Channel size, Mill-galvanized, Grip Strut
Model: BLN-104514 10 GL P7
Eaton B-Line series Grip Strut ten diamond plank, 120" Grating length, 24" Grating width, Steel, 4.5" Channel size, Mill-galvanized, Grip Strut
B-LINE
$1,695.47
B-Line Eaton series Grip Strut six diamond plank, 120" Grating length, 27.75" Grating width, Steel, 4" Channel size, Mill-galvanized, Grip Strut, 10 g
Model: BLN-64010 10 GL
Eaton B-Line series Grip Strut six diamond plank, 120" Grating length, 27.75" Grating width, Steel, 4" Channel size, Mill-galvanized, Grip Strut, 10 gauge
B-LINE
$4,563.69
B-Line Eaton series Grip Strut six diamond plank, 120" Grating length, 27.75" Grating width, Steel, 2" Channel size, Mill-galvanized, Grip Strut, 10 g
Model: BLN-62010 10 GL
Eaton B-Line series Grip Strut six diamond plank, 120" Grating length, 27.75" Grating width, Steel, 2" Channel size, Mill-galvanized, Grip Strut, 10 gauge
B-LINE
$4,077.61
Eaton B-Line series Grip Strut six diamond plank, 120" Grating length, 30" Grating width, Steel, 5" Channel size, Mill-galvanized, Grip Strut
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 5"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 10 gauge
- Product Height:
- 5 in
- Product Length Depth:
- 120 in
- Product Weight:
- 19.9 lb
- Product Width:
- 30 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
B-LINE 65010 10 GL P – Frequently Asked Questions
1) Is this Grip Strut plank OSHA compliant for plant walkways and stair platforms?
Yes. The six diamond Grip Strut plank is listed as OSHA compliant, and the serrated diamond openings are made for safe, sturdy footing where a non-slip surface is required, which is what plant catwalks, mezzanine platforms and equipment access decks are typically specified for.
2) How deep is the Grip Strut plank channel, and how much clearance do I need under the walkway?
The side channels are 5 inches deep, which is also the overall product height. Plan for 5 inches of structural depth below the walking surface plus whatever your support framing adds underneath.
3) Will mill-galvanized Grip Strut hold up outdoors or in a wash-down area?
The plank is 10 gauge steel with a mill-galvanized finish, which is the standard zinc-coated mill product suited to general industrial and covered outdoor use. It is not a hot-dip after fabrication coating, so cut ends and drilled holes leave bare steel that should be field-treated in wet or corrosive service.
4) Is six diamond Grip Strut the right choice over a solid plank or bar grating?
Six diamond plank gives a punched, serrated open surface that drains liquid and sheds debris while still giving grip, which is why it is used on catwalks, stair treads and equipment platforms rather than a solid plate that holds water. A solid plank is the better call where you need to keep tools or small parts from dropping through; welded bar grating is the heavier structural option for long unsupported spans. This 10 gauge steel channel-form plank sits between them for foot-traffic access work.
5) Does the Grip Strut plank come with mounting hardware or clips?
No fasteners are included with the plank. The plank ships as the grating section only, so specify your own hold-down clips, bolts or welds to suit the support steel you are landing it on.
How fast can I get the B-LINE 65010 10 GL P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 65010 10 GL P come with a warranty?
Absolutely. The B-LINE 65010 10 GL P is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 65010 10 GL P?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 65010 10 GL P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.