Eaton B-Line series Grip Strut ten diamond plank, 144" Grating length, 24" Grating width, Steel, 4.5" Channel size, Mill-galvanized, Grip Strut, 12 gauge steel
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 4.5"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 12 gauge
- Product Height:
- 4.5 in
- Product Length Depth:
- 144 in
- Product Weight:
- 12.5 lb
- Product Width:
- 24 in
- Department:
- Electrical
- Product Finish:
- Mill-galvanized
- Product Material:
- Steel
B-LINE 104512 12 GL – Frequently Asked Questions
1) Is Grip Strut plank OSHA compliant for elevated walkways and platforms?
The 104512 12 GL plank is listed as OSHA compliant, and the diamond openings give the slip resistant surface that gets specified where non-slip footing is required, such as catwalks, mezzanine walkways, and equipment platforms.
2) Is mill-galvanized Grip Strut okay to use outdoors?
Mill-galvanized steel is the standard finish here, and it suits sheltered and general industrial exposure. Mill galvanizing coats the coil before fabrication, so the cut and pierced edges are bare steel. For wet, coastal, or chemically aggressive locations, plan on a hot-dip galvanized or stainless plank instead.
3) What gauge steel is this Grip Strut plank and how does that affect span?
It is 12 gauge steel, the heavier of the common Grip Strut gauges, formed into a 4.5 inch deep channel. That depth is what carries the load between supports, so set your support spacing from the manufacturer load table for a 4.5 inch channel at 12 gauge rather than from the plank length.
4) Does the Grip Strut plank come with clamps or fasteners for mounting?
The 104512 12 GL is the plank only. Hold-down clips, saddle clamps, or bolts to secure it to your beams, angle framing, or cable tray rails are ordered separately, so add them to the same order if the walkway is being built from scratch.
5) Can this plank be cut down to fit a shorter walkway run?
Grip Strut plank is steel and can be field cut to length, but the mill-galvanized coating leaves the cut end as bare steel. Touch the cut with a cold galvanizing compound if the walkway sees any moisture, and keep the cut end supported so the channel is not left cantilevered.
How fast can I get the B-LINE 104512 12 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 104512 12 GL come with a warranty?
Absolutely. The B-LINE 104512 12 GL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 104512 12 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 104512 12 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.