Eaton B-Line series Grip Strut three diamond plank, 120" Grating length, 7" Grating width, Aluminum, 2" Channel size, .100" Thick
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 2"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 12 gauge
- Product Height:
- 2 in
- Product Length Depth:
- 120 in
- Product Weight:
- 1.46 lb
- Product Width:
- 7 in
- Department:
- Electrical
- Product Material:
- Aluminum
- Product Length:
- 120 in
B-LINE 32010 10 AL – Frequently Asked Questions
1) Is Grip Strut plank OSHA compliant for elevated walkways and stair treads?
The Grip Strut three diamond plank is listed as OSHA Compliant and is made for safe, sturdy footing where non-slip surfacing is required. The diamond openings pierced through the surface shed liquid, mud and debris rather than holding it on the walking plane.
2) Should I use aluminum or steel Grip Strut for a wash-down or coastal area?
This plank is aluminum, which is the version people pick for corrosive, wet or coastal service and where crews have to carry and set planks by hand. Galvanized or painted steel Grip Strut is the choice when you need more load capacity per span; aluminum trades some of that for corrosion resistance and lighter handling.
3) How thick is the material on the 7 inch Grip Strut aluminum plank?
It is formed from 12 gauge aluminum, about .100 inch thick, and the 2 inch channel formed on each side is what gives the plank its stiffness over the span rather than the sheet thickness alone.
4) How much clearance do I need below a Grip Strut plank walkway?
Allow at least 2 inches below the walking surface. The plank has a 2 inch channel formed down each side, so that is the overall height of the section and the depth it drops onto your supporting beams or angle framing.
5) Does the Grip Strut plank come with mounting hardware or clips?
No fasteners are included with the 32010 10 AL plank. It ships as the bare 10 foot aluminum section, so order your saddle clips, hold-down clamps or bolts separately to suit whether you are fastening to steel beam flange, angle or a bar support.
6) Which part number do I order for the 7 inch aluminum three diamond Grip Strut plank?
Order Eaton B-Line 32010 10 AL. That designation covers the three diamond plank in aluminum, 7 inch width, 120 inch length, 2 inch channel, .100 inch thick. There is a single configuration under it, so no finish or handing option to specify.
How fast can I get the B-LINE 32010 10 AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 32010 10 AL come with a warranty?
Absolutely. The B-LINE 32010 10 AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 32010 10 AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 32010 10 AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.