Eaton B-Line series Grip Strut three diamond plank, 120" Grating length, 7" Grating width, Steel, 2.5" Channel size, Plain, Grip Strut, 12 gauge
Manufacturer Resources
Product Specs
- Channel Size:
- 2.5"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 12 gauge
- Product Height:
- 2.5 in
- Product Length Depth:
- 120 in
- Product Weight:
- 4.9 lb
- Product Width:
- 7 in
- Department:
- Electrical
- Product Finish:
- Plain
- Product Material:
- Steel
- Product Length:
- 120 in
- Application:
- Safe, sturdy footing where non-slip is required
B-LINE 32512 10 BL – Frequently Asked Questions
1) What size opening does the B-Line Grip Strut three diamond plank cover?
The plank runs 120 inches long and 7 inches wide, with a 2.5 inch channel size and a 2.5 inch overall height. So one piece spans a 10 foot run and gives you a 7 inch tread width, with the turned-down channel legs adding the 2.5 inches of depth you need to allow for at the support points.
2) Is Grip Strut plank OSHA compliant for walkways and catwalks?
Yes. The three diamond Grip Strut plank is listed as OSHA compliant, and its serrated diamond surface is intended for safe, sturdy footing where non-slip is required, which is what puts it on catwalks, mezzanine walkways, stair treads and equipment platforms.
3) What does plain finish mean on this Grip Strut plank, and can it go outdoors?
Plain is bare, uncoated steel with no galvanizing or paint. It is fine for dry interior plant and mechanical room use, but outdoors or in a washdown or corrosive area it will rust unless you paint or coat it after install. If the walkway sees weather, specify a galvanized Grip Strut plank instead.
4) Is 12 gauge steel Grip Strut heavy enough for foot traffic on a maintenance platform?
12 gauge steel is the standard commercial weight for Grip Strut plank and is the material used here, formed into a 2.5 inch deep channel section. The channel depth is what carries the load between supports, not the sheet thickness alone, so your span between beams is the thing to size against the load table for your application.
5) Can one person carry and set a 10 foot Grip Strut plank?
The plank weighs 4.9 lb, so it is a one-man carry even at 120 inches long. The length is the awkward part, not the weight, which is why it handles well on ladder and lift work compared with bar grating panels of the same coverage.
6) Does the Grip Strut plank come with mounting clips or fasteners?
No fasteners are included with the plank itself. You order hold-down clips, saddle clips or weld it direct depending on your support steel, so budget that hardware separately when you take off the job.
How fast can I get the B-LINE 32512 10 BL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 32512 10 BL come with a warranty?
Absolutely. The B-LINE 32512 10 BL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 32512 10 BL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 32512 10 BL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.