Eaton B-Line series Grip Strut two diamond plank, 144" Grating length, 4.75" Grating width, Steel, 2" Channel size, Plain, Grip Strut, 14 gauge
Manufacturer Resources
Product Specs
- Application:
- Safe, sturdy footing where non-slip is required
- Channel Size:
- 2"
- Compliances:
- OSHA Compliant
- Material Gauge:
- 14 gauge
- Product Height:
- 2 in
- Product Length Depth:
- 144 in
- Product Weight:
- 2.6 lb
- Product Width:
- 4.75 in
- Department:
- Electrical
- Product Finish:
- Plain
- Product Material:
- Steel
B-LINE 22014 12 BL – Frequently Asked Questions
1) Is Grip Strut plank OSHA compliant for a work platform or catwalk?
Yes. The Grip Strut two diamond plank is listed as OSHA compliant, and the serrated diamond surface is intended for safe, sturdy footing where non-slip is required. That is what makes it the usual choice for catwalks, mezzanine walkways, stair treads and platform decking around equipment.
2) Does the plain finish Grip Strut need painting or galvanizing before outdoor use?
Plain is bare steel with no protective coating, so it is meant for dry indoor or protected locations unless you field paint or coat it. For wet, washdown or exterior service, specify a galvanized or coated Grip Strut plank instead of the plain version.
3) What is the exact part number to order for the 4.75 inch wide two diamond Grip Strut plank?
Order Eaton B-Line part number 22014 12 BL. That is the 144 inch long, 4.75 inch wide, 2 inch channel, 14 gauge steel two diamond plank in plain finish.
4) Do Grip Strut planks come with clamps or fasteners for attaching to the supports?
No hardware is included with the 22014 12 BL plank itself. Order your saddle clips, hold down clamps or self drilling fasteners separately, sized for the 2 inch channel depth of this plank.
5) What clearance does a 2 inch deep Grip Strut plank need under the walking surface?
Allow at least 2 inches below the finished walking level for the channel legs, plus whatever your support steel and clamps take up. If you are decking over an existing frame and headroom or a fixed threshold height is tight, that 2 inch depth is the number that decides whether it fits.
6) Can I cut Grip Strut plank to length in the field?
Yes. It is 14 gauge steel supplied in 144 inch lengths, so it is routinely cut down on site with a metal saw to suit the span between supports. Cutting exposes bare steel on the ends, and since this plank is a plain finish with no coating anyway, there is no galvanizing to touch up.
How fast can I get the B-LINE 22014 12 BL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 22014 12 BL come with a warranty?
Absolutely. The B-LINE 22014 12 BL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 22014 12 BL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 22014 12 BL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.