B-Line Eaton series ground mounted panel enclosure, 62" height, 10" length, 48" width, 4, Hinged cover, 4FD enclosure, Ground mount, Large double doo

NEMA 4 is the rating on the 624810-4FD, which covers indoor or outdoor use against windblown dust, rain, splashing water and hose-directed water. The seal is a seamless poured in-place gasket, and stainless door clamps hold the doors down against it. It's also UL 50 listed.

It measures 62 inches high, 48 inches wide and 10 inches deep. That 10 inch depth is the number to check first: it's a shallow, wide box meant for panel and terminal layouts, not for deep gear or anything needing back-to-front clearance.

It stands on its own. The 4FD is supplied with ground mount legs, so it sets on a pad or foundation rather than hanging off a wall. No wall structure has to carry it, which matters given the unit weighs 430.2 lb empty.

430.2 lb as shipped, empty. Plan on a forklift, hoist or lift gate to place it and at minimum a two-person crew; this is not a hand-carry enclosure, and the weight goes up once panels and wire are inside.

Yes, padlock provision is built in. The doors are hinged and secured with stainless steel door clamps, and the padlock provision lets you lock it out for an unattended outdoor or public-access location.

At 48 inches wide, a single door would need close to four feet of swing clearance in front of the box. The 4FD is a large double door style, so each leaf swings roughly half that, which is what you want in a tight equipment yard, alongside a walkway, or anywhere the enclosure sits near a fence or another cabinet.

The body is 12 gauge carbon steel, painted ANSI 61 grey from the factory. No field finishing needed, and the grey matches typical switchgear and control panel installations. Carbon steel means it does rely on that paint for corrosion protection, so touch up any drilled or cut penetrations.

What's defined on the 624810-4FD is the enclosure itself: the 12 gauge carbon steel body with ground mount legs, hinged double doors, poured in-place gasket, stainless clamps and padlock provision. Panel mounting hardware for whatever you're installing inside is a separate item, so budget the back panel or rail kit and your conduit fittings alongside the box.