B-Line Eaton series ground mounted panel enclosure, 74" height, 12" length, 60" width, 4, Hinged cover, 4FD enclosure, Ground mount, Large double doo

The 746012-4FD carries a NEMA 4 rating, so it is built to keep out windblown dust, rain, splashing water and hose-directed water. The seal is a seamless poured in-place gasket and the door is pulled down by stainless steel clamps, which is what holds that rating in a wet location. It is also UL 50 listed. Note it is NEMA 4, not 4X, so the carbon steel body relies on its paint finish rather than corrosion-resistant stainless for chemical or coastal exposure.

It weighs 613.6 lb empty. That is a two-person-plus-equipment lift, so plan on a forklift or crane and rigging to set it. It is a ground mounted unit on legs rather than a wall hung box, so it needs a level pad or slab capable of carrying that weight plus the gear you install inside.

Yes, padlock provisions are built in, so the doors can be secured with a standard shackle padlock without adding an aftermarket hasp. The doors are hinged and held closed by stainless steel clamps, which maintain the seal; the padlock is there for access control, not sealing.

With a 60 inch width, a single leaf would be unwieldy and need enormous swing room; the large double door layout splits that into two narrower leaves so you can open one side for routine work. A double door also gives you an unobstructed 60 inch wide opening across the full 74 inch height for installing a back panel or large gear in one piece, which two separate boxes cannot do.

It ships painted ANSI 61 grey, the standard light grey used across industrial switchgear and control enclosures, so it will match most existing panel lineups without repainting.

Yes, country of origin is the United States, which matters if the job carries domestic-sourcing requirements on the submittal. Order it by manufacturer part number 746012-4FD.