B-Line Eaton series ground mounted panel enclosure, 60" height, 12" length, 60" width, 4, Hinged cover, ES4 enclosure, Ground mount, Large double doo

The ES4 enclosure carries a NEMA 4 rating, so it's built to keep out windblown dust, rain, splashing water and hose-directed water. The seal comes from a closed cell neoprene gasket behind the hinged cover. If your application involves corrosive chemicals or frequent caustic washdown, a stainless or NEMA 4X enclosure is the better call, since this body is painted carbon steel.

60 inches high, 60 inches wide and 12 inches deep. That 12 inch depth is the number to check first, because with a large double door front and no interior panel included, deep breakers or wireway can run out of room fast.

No. The ES-606012-4 ships with no mounting provisions inside, so any subpanel, rails, or DIN mounting for your breakers, relays or terminal blocks is a separate item you need to order and specify. Plan that into the job before the enclosure lands on site.

Closure is a 3-point latching handle on the hinged double door, and the handle includes a key lock padlock provision. So you can padlock it shut for a site where only authorized electricians should have access, using your own shackle padlock.

The ES4 enclosure is built to UL 508A, the standard for industrial control panels, which is what most specs call out for a field-assembled control or power distribution panel. The NEMA 4 rating covers the environmental side.

12 gauge carbon steel. That's the heavier end of the range for control enclosures, which is why a 60 by 60 by 12 inch body comes in at 410 pounds. It takes knockouts and hole saw work fine, but drilling 12 gauge on site needs a proper punch rather than a step bit.

At 60 inches wide, a single door would swing out nearly five feet, which most equipment aisles can't give up. The double door style on the ES-606012-4 splits that swing in half and still opens the full 60 by 60 inch opening for wiring and component access.

Painted ANSI 61 grey, the standard light grey used across most industrial control enclosures, so it lines up visually with existing gear finished to the same spec. No field painting needed to match a typical plant line-up.

Yes, country of origin is the United States, which matters if you're buying under a domestic preference or Buy American requirement on a government or institutional project.