B-Line Eaton series ground mounted panel enclosure, 60" height, 16" length, 60" width, 4, Hinged cover, ES4 enclosure, Ground mount, Large double doo

NEMA 4 is the rating on the ES4 enclosure, so it handles falling rain, splashing water and hose-directed water. The seal comes from a closed cell neoprene gasket behind the hinged double doors, and the shell is 12 gauge carbon steel with a painted ANSI 61 grey finish. It is not a NEMA 4X box, so it is not the one to pick for corrosive or chemical-wash areas.

60 inches high, 60 inches wide and 16 inches deep. That is a wide, shallow footprint, which is why it uses the large double door style rather than a single door. Plan floor space and door swing for a 60 inch wide opening before you set it.

No. It is built as a ground mount, free standing enclosure, and at 441.1 lb with a 60 x 60 inch face there is nothing here intended to hang on a wall. If your install is a wall, you need a wall-mount NEMA 4 enclosure instead.

441.1 lb empty. That is a forklift or pallet jack and rigging job, not a two-man carry, and the floor or pad has to carry that plus whatever gear you mount inside. Get it staged on the pad before you start populating it.

Yes. The doors use a 3-point latching handle with a key lock and padlock provision, so you can run a standard shackle padlock through it in an unsecured yard. The 3-point latch also pulls the door tight against the neoprene gasket at top, middle and bottom, which is what maintains the seal on a door this size.

Yes. The ES-606016-4 ships as a sealed 12 gauge carbon steel body with no mounting provisions and no factory knockouts called out, so conduit entries get punched in the field. Use watertight hubs and fittings on any penetration you make, otherwise you give up the NEMA 4 seal the gasket and 3-point latch provide.

Country of origin is the US, which matters if you are procuring against a domestic-preference requirement on a government, utility or institutional job.