You may also like
B-Line Eaton series imperial cable tray and ladder, 6" Height, 11.598" Length, 6" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" Ra
Model: BLN-6A-06-30VO12
Eaton B-Line series imperial cable tray and ladder, 6" Height, 11.598" Length, 6" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" Radius
B-LINE
$414.70
B-Line Eaton series imperial cable tray and ladder, 6" Height, 11.598" Length, 9" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" Ra
Model: BLN-6A-09-30VO12
Eaton B-Line series imperial cable tray and ladder, 6" Height, 11.598" Length, 9" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" Radius
B-LINE
$424.34
B-Line Eaton series imperial cable tray and ladder, 4" Height, 11.598" Length, 9" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" Ra
Model: BLN-4A-09-30VO12
Eaton B-Line series imperial cable tray and ladder, 4" Height, 11.598" Length, 9" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" Radius
B-LINE
$445.57
B-Line Eaton series imperial cable tray and ladder, 6" Height, 11.598" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" R
Model: BLN-6A-12-30VO12
Eaton B-Line series imperial cable tray and ladder, 6" Height, 11.598" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" Radius
B-LINE
$395.41
B-Line Eaton series imperial cable tray and ladder, 6" Height, 11.598" Length, 30" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" R
Model: BLN-6A-30-30VO12
Eaton B-Line series imperial cable tray and ladder, 6" Height, 11.598" Length, 30" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" Radius
B-LINE
$518.86
Eaton B-Line series imperial cable tray and ladder, 4" Height, 11.598" Length, 6" Width, Series 2-5 vertical outside bend, Aluminum, 30° Angle, 12" Radius
Manufacturer Resources
Product Specs
- Angle:
- 30°
- Certifications:
- CSA
- Product Height:
- 4 in
- Product Length Depth:
- 11.598 in
- Product Weight:
- 2.462 lb
- Product Width:
- 6 in
- Radius:
- 12 in
- Department:
- Electrical
- Product Type:
- Series 2-5 vertical outside bend
- Product Details:
- Series 2-5 vertical outside bend
- Product Material:
- Aluminum
B-LINE 4A-06-30VO12 – Frequently Asked Questions
1) What does a 30 degree vertical outside bend do in a cable tray run?
A vertical outside bend carries the tray run over an obstruction or down a change in elevation where the tray bends away from the cable side. The Eaton B-Line 4A-06-30VO12 turns the run 30 degrees on a 12 inch radius, so cables hold their bend radius through the transition instead of breaking over a hard corner. It is a fitting, not a straight section, and it splices into the run at each end.
2) How much straight-run length do I lose when I drop this 30 degree bend into the layout?
Lay out 11.598 inches of run for the fitting itself, measured end to end. That is the dimension to subtract from your straight sections when you cut the layout, along with the 12 inch bend radius it sweeps through.
3) Is this cable tray bend aluminum or steel, and does it matter for a corrosive or outdoor area?
Aluminum. It is the lighter, corrosion resistant choice for exterior runs, wash-down areas, and plants where galvanized steel would rust out. Aluminum tray also has to be bonded and grounded per your electrical spec, and mixing aluminum fittings into a steel run creates a dissimilar metal joint, so keep the whole run in one material.
4) Does this Eaton B-Line cable tray fitting carry any agency listing for a Canadian jobsite?
It carries CSA certification, which is the listing inspectors look for on cable tray in Canada.
5) Do splice plates and hardware come with this cable tray bend?
The 4A-06-30VO12 is supplied as the bend section itself. Splice plates, bolts, and any hangers or supports at the transition are ordered separately, so count two splice connections into your hardware take-off for each bend you set.
6) What is the part number and weight for the 6 inch, 30 degree aluminum vertical outside bend?
Order it as Eaton B-Line 4A-06-30VO12. It weighs 2.462 lb, light enough for one person to set and splice on a ladder without a second hand.
How fast can I get the B-LINE 4A-06-30VO12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-06-30VO12 come with a warranty?
Absolutely. The B-LINE 4A-06-30VO12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-06-30VO12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-06-30VO12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.