You may also like
B-Line Eaton series imperial cable tray and ladder, 4" Height, 14.892" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" R
Model: BLN-4A-12-60VO12
Eaton B-Line series imperial cable tray and ladder, 4" Height, 14.892" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" Radius
B-LINE
$761.90
B-Line Eaton series imperial cable tray and ladder, 6" Height, 14.892" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" R
Model: BLN-6A-24-60VO12
Eaton B-Line series imperial cable tray and ladder, 6" Height, 14.892" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" Radius
B-LINE
$1,078.23
B-Line Eaton series imperial cable tray and ladder, 4" Height, 14.892" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" R
Model: BLN-4A-36-60VO12
Eaton B-Line series imperial cable tray and ladder, 4" Height, 14.892" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" Radius
B-LINE
$979.86
B-Line Eaton series imperial cable tray and ladder, 4" Height, 14.892" Length, 18" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" R
Model: BLN-4A-18-60VO12
Eaton B-Line series imperial cable tray and ladder, 4" Height, 14.892" Length, 18" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" Radius
B-LINE
$794.69
B-Line Eaton series imperial cable tray and ladder, 6" Height, 14.892" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" R
Model: BLN-6A-12-60VO12
Eaton B-Line series imperial cable tray and ladder, 6" Height, 14.892" Length, 12" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" Radius
B-LINE
$1,049.30
Eaton B-Line series imperial cable tray and ladder, 4" Height, 14.892" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 60° Angle, 12" Radius
Manufacturer Resources
Product Specs
- Angle:
- 60°
- Certifications:
- CE
- Product Height:
- 4 in
- Product Length Depth:
- 14.892 in
- Product Weight:
- 6.232 lb
- Product Width:
- 24 in
- Radius:
- 12 in
- Department:
- Electrical
- Product Type:
- Series 2-5 vertical outside bend
- Product Details:
- Series 2-5 vertical outside bend
- Product Material:
- Aluminum
B-LINE 4A-24-60VO12 – Frequently Asked Questions
1) What does a 60 degree vertical outside bend do in a cable tray run?
A vertical outside bend carries the tray run over an obstruction or down a change in elevation, with the fitting bending away from the cable side. This B-Line 4A-24-60VO12 turns the run through 60 degrees on a 12 inch inside radius, in a 24 inch tray width with 4 inch side rails. Use an inside bend instead when the run needs to turn toward the cable side of the tray.
2) How much space do I need to allow for this cable tray bend in my layout?
Allow for a 14.892 inch length along the run for the fitting itself, plus the 12 inch bend radius it turns on. In a tight ceiling space or close to a wall penetration, that radius is usually what governs whether a 60 degree turn will fit, so lay it out before you cut the adjoining straight sections.
3) Why does the bend radius matter more than the angle on a cable tray fitting?
The radius sets the minimum bending radius the conductors see as they turn. A 12 inch radius fitting keeps large-diameter power cable within a gentler sweep than a tighter radius would, which matters when your cable spec lists a minimum bend radius. The 60 degree angle only sets how far the run changes direction.
4) Is this aluminum cable tray bend suitable for a damp or corrosive area?
Aluminum construction handles outdoor, damp and many mildly corrosive environments better than plain steel tray, and it keeps the fitting light: this one weighs 6.232 lb, so one person can hold it in place while bolting up. For heavily corrosive process areas, specify a coated or stainless tray system instead.
5) What is the exact part number to order this 60 degree outside bend?
Order B-Line (Eaton) part 4A-24-60VO12. The number reads as 4 inch aluminum, 24 inch width, 60 degree vertical outside bend, 12 inch radius, which is useful when you are checking a submittal against the drawing.
6) Do splice plates come with this cable tray bend?
The 4A-24-60VO12 is supplied as the bend fitting itself. Splice plates and hardware to join it to the adjoining straight sections are separate items, as are the hangers or trapeze supports carrying the run through the elevation change, so add those to the order.
7) Does this Eaton B-Line cable tray fitting carry any certification marking?
It carries CE marking. If your project submittal asks for a certification listing on tray fittings, that is what is on record for the 4A-24-60VO12.
How fast can I get the B-LINE 4A-24-60VO12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-24-60VO12 come with a warranty?
Absolutely. The B-LINE 4A-24-60VO12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-24-60VO12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-24-60VO12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.