B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,458.21
B-Line Eaton series imperial cable tray and ladder, 4" Height, 19.5" Length, 9" Width, Series 2-5 horizontal cross, Aluminum, 12" Radius

B-Line Eaton series imperial cable tray and ladder, 4" Height, 19.5" Length, 9" Width, Series 2-5 horizontal cross, Aluminum, 12" Radius

(No reviews yet) Write a Review

Model: 4A-09-HX12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,458.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 19.5" Length, 9" Width, Series 2-5 horizontal cross, Aluminum, 12" Radius

Manufacturer Resources

Product Specs

Certifications:
CE
Product Height:
4 in
Product Length Depth:
19.5 in
Product Weight:
17.063 lb
Product Width:
9 in
Radius:
12 in
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Tees / Crosses
Product Type:
Series 2-5 horizontal cross
Product Details:
Series 2-5 horizontal cross
Product Material:
Aluminum

B-LINE 4A-09-HX12 – Frequently Asked Questions

1) What tray width does the B-Line 4A-09-HX12 horizontal cross fit?
The 4A-09-HX12 is built for 9 inch wide cable tray with a 4 inch side rail height. Both legs of the cross match that, so it joins four runs of 9 inch, 4 inch deep Series 2-5 tray at a four-way intersection. If your run is a different width, you need the cross sized to that width instead.
2) What bend radius does this B-Line aluminum cross give the cable, and why does it matter?
It is a 12 inch radius fitting. That radius sets the minimum bend the conductors take turning the corner, so it is the number to check against the cable manufacturer's minimum bending radius for the largest cable in the run. Larger power feeders often need the bigger radius fittings; 12 inch suits most control and moderate power runs.
3) How much space do I need to allow for a 12 inch radius cross in a 9 inch tray layout?
Allow 19.5 inches of length for the fitting itself. With a 12 inch radius and a 9 inch tray width, that dimension is what the cross occupies along each axis from the intersection, so lay out your straight sections and hangers to that figure rather than butting straight runs to the centerline.
4) Is this cable tray cross aluminum or steel?
Aluminum. That makes it a lighter fitting to handle at height and a common choice where corrosion is a concern, such as damp or chemical environments. Keep the whole run in aluminum so the bonding and the splice hardware match; mixing aluminum fittings into a steel tray run creates dissimilar metal contact at every joint.
5) Should I use a horizontal cross or two tees where four cable tray runs meet?
Use the cross when four runs actually meet at one point in the same horizontal plane, which is what this Series 2-5 fitting is made for. Tees are for three-way branches. Building a four-way out of tees adds extra splice points and throws off the radius the cable turns on, which is set here at 12 inches.
6) What is the exact part number to order for the B-Line 9 inch, 4 inch deep aluminum cross with a 12 inch radius?
Order Eaton B-Line part 4A-09-HX12. Reading the number: 4A is the 4 inch aluminum profile, 09 the 9 inch tray width, HX the horizontal cross, and 12 the radius in inches.
7) How much does the B-Line 4A-09-HX12 cross weigh for overhead rigging?
17.063 lb. Light enough for a single installer to set on trapeze hangers, but it is a four-way fitting, so plan support on each of the four approaching runs near the intersection rather than hanging the cross itself unsupported.
8) Does the B-Line 4A-09-HX12 carry any certification marking?
It is CE marked. That is the certification held on record for this aluminum Series 2-5 cross.
How fast can I get the B-LINE 4A-09-HX12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-09-HX12 come with a warranty?
Absolutely. The B-LINE 4A-09-HX12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-09-HX12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-09-HX12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!