Eaton B-Line series imperial cable tray and ladder, 4" Height, 33" Length, 12" Width, Series 2-5 horizontal cross, Aluminum, 24" Radius
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Product Height:
- 4 in
- Product Length Depth:
- 33 in
- Product Weight:
- 33.951 lb
- Product Width:
- 12 in
- Radius:
- 24 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 horizontal cross
- Product Details:
- Series 2-5 horizontal cross
- Product Material:
- Aluminum
- Product Length:
- 33 in
B-LINE 4A-12-HX24 – Frequently Asked Questions
1) Should I use a horizontal cross or two tees where my cable tray runs intersect?
A horizontal cross like the 4A-12-HX24 is the part for a true four-way intersection, where a run continues straight through and branches both left and right on the same plane. Two tees back to back leaves a short straight stub between them and adds splice points. Use a tee when only one branch leaves the main run; use the cross when both do.
2) Does the B-Line 4A-12-HX24 come with splice plates and hardware to connect it to my straight tray sections?
The 4A-12-HX24 is supplied as the cross fitting itself. Splice plates and their bolt hardware are ordered separately as B-Line Series 2 splice connectors, and you need a set for each of the four connections. Order them along with the fitting so the run can be closed out in one visit.
3) What is the exact part number to order for a 12 inch wide, 4 inch deep aluminum horizontal cross with a 24 inch radius?
Order Eaton B-Line part 4A-12-HX24. The number reads out as 4 inch rail, aluminum, 12 inch width, horizontal cross, 24 inch radius, which is how B-Line codes the Series 2-5 fittings.
4) How much does the 4A-12-HX24 cross weigh, and can one person hang it?
It weighs 33.951 lb. That is a two-hand lift on a ladder, and at 33 inches across the legs it is awkward to hold in place alone. Most crews set the supports first and land the cross on hangers rather than trying to bolt it up unsupported.
5) Will the aluminum 4A-12-HX24 cross work in a damp or corrosive area?
It is aluminum, which is the usual choice over pre-galvanized steel for wash-down areas, coastal sites, and water and wastewater plants because it does not rust. Aluminum is also lighter on the supports. Where the environment is chemically aggressive or the spec calls for hot-dip galvanized or stainless, aluminum is not the substitution.
How fast can I get the B-LINE 4A-12-HX24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-12-HX24 come with a warranty?
Absolutely. The B-LINE 4A-12-HX24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-12-HX24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-12-HX24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.