B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$678.96
B-Line Eaton series imperial cable tray and ladder, 4" Height, 26.375" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 12" Radius

B-Line Eaton series imperial cable tray and ladder, 4" Height, 26.375" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 12" Radius

(No reviews yet) Write a Review

Model: 4A-36-45HB12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$678.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 26.375" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 12" Radius

Manufacturer Resources

Product Specs

Angle:
45°
Certifications:
CE
Product Height:
4 in
Product Length Depth:
26.375 in
Product Weight:
10.041 lb
Product Width:
36 in
Radius:
12 in
Department:
Electrical
Product Type:
Series 2-5 horizontal bend
Product Details:
Series 2-5 horizontal bend
Product Material:
Aluminum

B-LINE 4A-36-45HB12 – Frequently Asked Questions

1) What size cable tray does the B-Line 4A-36-45HB12 horizontal bend fit?
The 4A-36-45HB12 is built for 36 inch wide, 4 inch deep aluminum tray in the Eaton B-Line Series 2 through 5 line. Width and depth have to match the straight sections it ties into, so use it only where the run is 36 inch wide, 4 inch loading depth tray.
2) How much space do I need to lay out a 45 degree bend in a 36 inch cable tray run?
Allow for a 12 inch inside radius and roughly 26-3/8 inches of overall length on the fitting itself. That is the turn geometry for this 45 degree horizontal bend, so your straight sections stop short of the corner by that much on each leg. If the space is tight, a tighter turn is not available in this part number.
3) Is this B-Line bend a horizontal turn or does it change elevation?
It is a horizontal bend, meaning it turns the run 45 degrees in plan while staying at the same elevation. If you need to drop or rise over an obstruction, you need a vertical inside or outside elbow instead, not this fitting.
4) What is the exact part number to order this 36 inch, 45 degree B-Line horizontal bend?
Order Eaton B-Line 4A-36-45HB12. Read from the number: 4 inch depth aluminum, 36 inch width, 45 degree horizontal bend, 12 inch radius. That is the identifier to put on the purchase order and the submittal.
5) Does the B-Line 45 degree aluminum tray bend carry any certification for a European or export project?
It carries CE marking, which is what an export or EU-specified job typically asks for on the submittal.
How fast can I get the B-LINE 4A-36-45HB12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-36-45HB12 come with a warranty?
Absolutely. The B-LINE 4A-36-45HB12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-36-45HB12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-36-45HB12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!