You may also like
B-Line Eaton series imperial cable tray and ladder, 6" Height, 34.875" Length, 12" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 36" Radius
Model: BLN-6A-12-45HB36
Eaton B-Line series imperial cable tray and ladder, 6" Height, 34.875" Length, 12" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 36" Radius
B-LINE
$734.90
B-Line Eaton series imperial cable tray and ladder, 4" Height, 34.875" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 24" Radius
Model: BLN-4A-36-45HB24
Eaton B-Line series imperial cable tray and ladder, 4" Height, 34.875" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 24" Radius
B-LINE
$885.34
B-Line Eaton series imperial cable tray and ladder, 6" Height, 34.875" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 24" Radius
Model: BLN-6A-36-45HB24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 34.875" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 24" Radius
B-LINE
$986.87
B-Line Eaton series imperial cable tray and ladder, 4" Height, 26.375" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 12" Radius
Model: BLN-4A-36-45HB12
Eaton B-Line series imperial cable tray and ladder, 4" Height, 26.375" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 12" Radius
B-LINE
$678.96
B-Line Eaton series imperial cable tray and ladder, 4" Height, 43.375" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 36" Radius
Model: BLN-4A-36-45HB36
Eaton B-Line series imperial cable tray and ladder, 4" Height, 43.375" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 36" Radius
B-LINE
$1,047.37
Eaton B-Line series imperial cable tray and ladder, 4" Height, 34.875" Length, 12" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 36" Radius
Manufacturer Resources
Product Specs
- Angle:
- 45°
- Certifications:
- CSA
- Product Height:
- 4 in
- Product Length Depth:
- 34.875 in
- Product Weight:
- 8.927 lb
- Product Width:
- 12 in
- Radius:
- 36 in
- Department:
- Electrical
- Product Type:
- Series 2-5 horizontal bend
- Product Details:
- Series 2-5 horizontal bend
- Product Material:
- Aluminum
- Product Length:
- 34.875 in
B-LINE 4A-12-45HB36 – Frequently Asked Questions
1) Will the Eaton B-Line 4A-12-45HB36 bend match a 12 inch wide, 4 inch deep cable tray run?
Yes. The 4A-12-45HB36 horizontal bend is built at 12 inches width and 4 inches height, so it lines up with a 12 inch wide, 4 inch loading depth aluminum tray run in the same Series 2-5 family. Matching both the width and the rail height matters, since a mismatched rail depth leaves the side rails out of plane at the splice.
2) How much room do I need to lay out a 45 degree cable tray bend with a 36 inch radius?
Plan for a 36 inch inside radius and an overall run length of 34.875 inches through the fitting. A 36 inch radius bend is the wide sweep option, chosen where the cable being pulled has a large minimum bend radius. If your ceiling space or wall offset will not take that sweep, you need a tighter radius bend instead, not this one.
3) Is this cable tray bend aluminum or steel, and does that matter for outdoor or corrosive areas?
It is aluminum. That is the usual pick for exterior runs, wash-down areas, and coastal or chemical environments where a plain steel tray would need galvanizing or paint. Aluminum is also lighter to handle overhead, and this fitting comes in at 8.927 lb. If you are tying into an existing steel tray run, keep the dissimilar-metal contact in mind at the splice.
4) Does the B-Line 4A-12-45HB36 tray bend carry any third-party certification for a spec job?
It is CSA certified, which is the listing most often called out on Canadian projects and accepted on many US electrical specs for cable tray fittings. If your drawing names CSA for tray and fittings, this bend meets that call-out.
5) How do I confirm I am ordering the right B-Line tray bend part number?
The part to call out is 4A-12-45HB36. Reading it across: 4 inch rail height, 12 inch width, 45 degree horizontal bend, 36 inch radius, in aluminum. If any one of those four values differs on your run, it is a different part number, so check the width and radius on the drawing before releasing the order.
How fast can I get the B-LINE 4A-12-45HB36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-12-45HB36 come with a warranty?
Absolutely. The B-LINE 4A-12-45HB36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-12-45HB36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-12-45HB36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.