B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$885.34
B-Line Eaton series imperial cable tray and ladder, 4" Height, 34.875" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 24" Radius

B-Line Eaton series imperial cable tray and ladder, 4" Height, 34.875" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 24" Radius

(No reviews yet) Write a Review

Model: 4A-36-45HB24
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$885.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 34.875" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 45° Angle, 24" Radius

Manufacturer Resources

Product Specs

Angle:
45°
Certifications:
CE
Product Height:
4 in
Product Length Depth:
34.875 in
Product Weight:
12.607 lb
Product Width:
36 in
Radius:
24 in
Department:
Electrical
Product Type:
Series 2-5 horizontal bend
Product Details:
Series 2-5 horizontal bend
Product Material:
Aluminum

B-LINE 4A-36-45HB24 – Frequently Asked Questions

1) What size cable tray does the B-Line 4A-36-45HB24 horizontal bend fit?
It matches a 36 inch wide, 4 inch deep aluminum tray run. The bend is a Series 2-5 horizontal bend, so both straight sections coming into it need to be the same 36 inch width and 4 inch side rail height or the rails will not line up at the splice.
2) How much room do I need to lay out a 45 degree turn with this B-Line bend?
Plan for a 24 inch inside radius and about 34-7/8 inches of overall length through the fitting. That is the dimension you need on the drawing between the ends of the two straight runs it joins; a tighter corner than 24 inch radius will not take this piece.
3) Is this cable tray bend aluminum or steel?
Aluminum. It weighs 12.607 lb, which is light enough for one electrician to set in place on a ladder, and it suits outdoor or damp-location tray runs better than plain painted steel. Keep the whole run in the same material so you are not mixing aluminum and steel at the splice plates.
4) Does the B-Line 4A-36-45HB24 bend come with splice plates?
The part supplied is the bend section itself, model 4A-36-45HB24. Splice plates, hardware and any supports at the fitting are ordered separately, so count two splice connections per bend when you build the takeoff.
5) Does this Eaton B-Line cable tray bend carry any certification marking?
It is CE marked. That is the only marking carried on the 4A-36-45HB24 horizontal bend.
How fast can I get the B-LINE 4A-36-45HB24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-36-45HB24 come with a warranty?
Absolutely. The B-LINE 4A-36-45HB24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-36-45HB24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-36-45HB24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!