Eaton B-Line series imperial cable tray and ladder, 4" Height, 27" Length, 24" Width, Series 2-5 vertical tee down, Aluminum, 24" Radius
Manufacturer Resources
Product Specs
- Certifications:
- CSA
- Product Height:
- 4 in
- Product Length Depth:
- 27 in
- Product Weight:
- 20.4 lb
- Product Width:
- 24 in
- Radius:
- 24 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 vertical tee down
- Product Details:
- Series 2-5 vertical tee down
- Product Material:
- Aluminum
B-LINE 4A-24-VT24 – Frequently Asked Questions
1) What does a Series 2-5 vertical tee down fitting do in a cable tray run?
The B-Line 4A-24-VT24 is a vertical tee down: it takes a horizontal cable tray run and branches a third leg downward while the straight run continues through. Use it where a feeder tray has to drop cable to equipment below without breaking the main run. It is a Series 2-5 aluminum fitting built for 24 inch wide tray with a 4 inch side rail height.
2) How much vertical clearance and space do I need to install the 4A-24-VT24?
Plan for a 24 inch radius on the bend and an overall fitting length of 27 inches. The 24 inch radius is the gentle option for large-diameter or fiber cable where bend radius limits matter; if your shaft or ceiling space cannot take a 24 inch sweep, you need a tighter radius version of the same fitting.
3) Is this B-Line cable tray fitting certified for Canadian jobs?
The 4A-24-VT24 vertical tee down carries CSA certification, which is what an inspector on a Canadian commercial or institutional project will look for on the tray system.
4) What is the difference between a vertical tee down and a vertical elbow in cable tray?
A vertical elbow simply turns the whole run down; a vertical tee down keeps the horizontal run going straight through and adds a third leg dropping away from it. Pick the tee, like the 4A-24-VT24, when cable has to branch to a panel or equipment below while the main feeder carries on. If the entire tray changes level, an elbow is the right part.
5) Do splice plates and hardware come with the B-Line vertical tee down?
Order the fitting by its model number, 4A-24-VT24, and treat splice plates, hangers and support hardware as separate line items. Tray fittings ship as the formed section; the connection hardware and the support at each side of the fitting are specified with the rest of the run.
How fast can I get the B-LINE 4A-24-VT24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-24-VT24 come with a warranty?
Absolutely. The B-LINE 4A-24-VT24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-24-VT24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-24-VT24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.