B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,521.03
B-Line Eaton series imperial cable tray and ladder, 4" Height, 36" Length, 18" Width, 18" and 30" Tray widths, Series 2-5 horizontal expanding tee, Al

B-Line Eaton series imperial cable tray and ladder, 4" Height, 36" Length, 18" Width, 18" and 30" Tray widths, Series 2-5 horizontal expanding tee, Al

(No reviews yet) Write a Review

Model: 4A-18-30-HT24
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,521.03
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 36" Length, 18" Width, 18" and 30" Tray widths, Series 2-5 horizontal expanding tee, Aluminum, 30° Angle, 24" Radius

Manufacturer Resources

Product Specs

Angle:
30°
Certifications:
CE
Product Height:
4 in
Product Length Depth:
36 in
Product Weight:
27.27 lb
Product Width:
18 in
Radius:
24 in
Special Features:
18" & 30" Tray widths
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Tees / Crosses
Product Type:
Series 2-5 horizontal expanding tee
Product Details:
Series 2-5 horizontal expanding tee
Product Material:
Aluminum

B-LINE 4A-18-30-HT24 – Frequently Asked Questions

1) What tray widths does the B-Line 4A-18-30-HT24 expanding tee connect?
Model 4A-18-30-HT24 is an expanding tee, so it does not run one width straight through. It takes 18 inch and 30 inch tray widths, which is what the expanding design is for: the run enters at one width and the branch leaves at the other. If both legs of your intersection are the same width, you want a straight tee, not this expanding fitting.
2) Will this tee match my 4 inch deep aluminum cable tray run?
Yes. The fitting is built at 4 inch height in aluminum, so it matches a 4 inch loading depth aluminum tray of the Series 2-5 system. Match the side rail depth and the material to avoid mixing aluminum and steel in the same run.
3) What bend radius is this cable tray tee, and why does it matter for my cable pulls?
It is a 24 inch radius fitting. The radius sets the minimum bend the conductors see turning into the branch, so pick it against the cable manufacturer's minimum bending radius. Large power or fiber runs that need a wide sweep are the reason to spec the 24 inch rather than a tighter radius fitting.
4) How much ceiling space do I need to lay out this cable tray tee?
Plan for a 36 inch length and 18 inch width footprint on the fitting itself, plus the 24 inch radius sweep on the branch side. Lay that out on the drawing before committing hanger locations, since the sweep is what usually collides with duct or sprinkler mains.
5) Do splice plates and hardware come with this B-Line expanding tee?
The item is the fitting itself, an aluminum Series 2-5 horizontal expanding tee. Splice connectors, hold-down clamps, and the trapeze or wall bracket support at each end of the fitting are ordered separately, so count those into the job material along with the tee.
6) How much does the B-Line 4A-18-30-HT24 tee weigh, and can one person set it?
27.27 lb. That is a two-hand lift on its own, but at 36 inches long and 18 inches wide overhead it is generally a two-worker set on trapeze hangers, particularly at ladder height.
7) Is aluminum the right choice for this tray fitting in a damp or corrosive area?
Aluminum is the material here, which is the usual pick where weight and corrosion resistance matter more than raw strength, and it is non-magnetic. For heavy industrial washdown or high chemical exposure, a coated steel or fiberglass tray system is the alternative worth pricing, but you cannot mix those into an aluminum Series 2-5 run.
8) What certification does this Eaton B-Line cable tray tee carry?
CE marked. That is the certification on record for the 4A-18-30-HT24 expanding tee.
How fast can I get the B-LINE 4A-18-30-HT24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-18-30-HT24 come with a warranty?
Absolutely. The B-LINE 4A-18-30-HT24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-18-30-HT24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-18-30-HT24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!