B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3,036.03
B-Line Eaton series imperial cable tray and ladder, 4" Height, 54" Length, 6" Width, Series 2-5 horizontal tee, Aluminum, 48" Radius

B-Line Eaton series imperial cable tray and ladder, 4" Height, 54" Length, 6" Width, Series 2-5 horizontal tee, Aluminum, 48" Radius

(No reviews yet) Write a Review

Model: 4A-06-HT48
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3,036.03
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 54" Length, 6" Width, Series 2-5 horizontal tee, Aluminum, 48" Radius

Manufacturer Resources

Product Specs

Certifications:
CSA
Product Height:
4 in
Product Length Depth:
54 in
Product Weight:
36.721 lb
Product Width:
6 in
Radius:
48 in
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Tees / Crosses
Product Type:
Series 2-5 horizontal tee
Product Details:
Series 2-5 horizontal tee
Product Material:
Aluminum

B-LINE 4A-06-HT48 – Frequently Asked Questions

1) How much room do I need to lay out a 48 inch radius tee in the ceiling?
This tee is built on a 48 inch radius, and the fitting itself runs 54 inches in length. Plan clear space on all three legs before you hang it - a 48 inch radius sweep needs far more room than a short-radius fitting, so check it against beams, ducts and drops in the ceiling cavity first.
2) Why choose a 48 inch radius tee instead of a tighter one?
Radius is driven by the bend radius of the cable you are pulling, not by the tray. Large power feeders and fiber need generous sweeps, and a 48 inch radius fitting like the 4A-06-HT48 gives the cable a gradual turn through the branch. If your cable allows a tighter bend, a shorter radius tee takes up much less ceiling space.
3) Is this B-Line tee aluminum or steel, and does that matter for a wet or corrosive area?
It is aluminum. That keeps the weight down for overhead work and gives you inherent corrosion resistance without galvanizing, which is why aluminum tray is common in water treatment, food plants and coastal or damp industrial areas. If you need the higher load capacity of steel, aluminum is not the substitute.
4) How much does the 4A-06-HT48 tee weigh for rigging and support design?
36.721 lb for the fitting itself. Add cable fill and the adjoining tray spans when you size hangers and trapeze supports - on a 48 inch radius tee the load sits well out from the centerline on three legs, so it usually wants its own support rather than hanging off the straight sections.
5) Is this cable tray tee CSA certified for a Canadian job?
Yes, the 4A-06-HT48 carries CSA certification, which is what inspectors look for on cable tray systems in Canada.
6) What is the exact part number to order for a 6 inch, 4 inch deep aluminum horizontal tee with a 48 inch radius?
Order Eaton B-Line part 4A-06-HT48. The number reads out as the fitting: 4 inch height, aluminum, 06 inch width, horizontal tee, 48 inch radius.
7) Will a horizontal tee work if my branch run drops to a lower elevation?
No. A horizontal tee keeps all three legs in the same plane. If the branch has to change elevation you need a vertical fitting, an inside or outside riser, at the point of the drop, with the tee staying flat in the run.
8) Does a horizontal tee come with splice plates and hardware?
Treat the 4A-06-HT48 as the fitting body only. Every joint where the tee meets straight tray needs splice plates and hardware, and a tee has three of them, so order splice kits for all three connections along with the fitting.
How fast can I get the B-LINE 4A-06-HT48 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-06-HT48 come with a warranty?
Absolutely. The B-LINE 4A-06-HT48 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-06-HT48?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-06-HT48 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!