B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,033.01
B-Line Eaton series imperial cable tray and ladder, 4" Height, 55.188" Length, 24" Width, Series 2-5 vertical inside bend, Aluminum, 90° Angle, 48" Ra

B-Line Eaton series imperial cable tray and ladder, 4" Height, 55.188" Length, 24" Width, Series 2-5 vertical inside bend, Aluminum, 90° Angle, 48" Ra

(No reviews yet) Write a Review

Model: 4A-24-90VI48
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,033.01
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 4" Height, 55.188" Length, 24" Width, Series 2-5 vertical inside bend, Aluminum, 90° Angle, 48" Radius

Manufacturer Resources

Product Specs

Angle:
90°
Certifications:
CE
Product Height:
4 in
Product Length Depth:
55.188 in
Product Weight:
19.6 lb
Product Width:
24 in
Radius:
48 in
Department:
Electrical
Product Type:
Series 2-5 vertical inside bend
Product Details:
Series 2-5 vertical inside bend
Product Material:
Aluminum

B-LINE 4A-24-90VI48 – Frequently Asked Questions

1) Is the Eaton B-Line 4A-24-90VI48 a vertical inside bend or a vertical outside bend?
It's a vertical inside bend, 90 degrees, for Series 2 through 5 aluminum cable tray. An inside bend turns the tray so the fitting's radius wraps the inside of the turn, which is what you use when the tray runs up a wall and then turns to run horizontally along the ceiling. If your run drops away from the ceiling instead, you need the vertical outside bend version, not this one.
2) Will this fitting bolt to any Eaton B-Line aluminum cable tray, or only certain series?
It's a Series 2 through 5 fitting. Those are the aluminum ladder tray series it's made to splice into, at 24 inch width and 4 inch rail depth. Tray outside that series range, or a different width or rail depth, will not line up at the splice plate.
3) How much space do I need to allow above the tray run for this vertical bend?
Plan the layout around 55.188 inches of developed length through the fitting, with a 48 inch turn radius. On a vertical inside 90, that radius is what sets how far off the wall or ceiling the transition swings, so tight mechanical rooms and low plenums are where this fitting causes trouble. Confirm the clearance before you commit to the 48 inch radius rather than a shorter one.
4) Is this cable tray bend aluminum or steel, and can I run it outdoors?
Aluminum. It's the standard choice for corrosive and outdoor industrial environments because it doesn't need galvanizing to resist corrosion, and it's light enough for one person to set on a ladder, this fitting weighs 19.6 lb. Keep the fitting material matched to the straight sections; mixing aluminum tray with steel fittings invites galvanic issues at the splice.
5) What part number do I quote for a 24 inch, 4 inch deep aluminum 90 degree vertical inside bend with a 48 inch radius?
Eaton B-Line part number 4A-24-90VI48. The number reads out as 4 inch rail, aluminum, 24 inch width, 90 degree vertical inside, 48 inch radius, which is useful when you're checking a submittal against what was actually shipped.
6) Do splice plates come with the 4A-24-90VI48 vertical bend?
Order splice hardware separately. The 4A-24-90VI48 is supplied as the bend itself, and each end of a fitting needs a splice plate set to join it to the adjoining straight section, so count two sets per fitting when you build the material list.
7) Does this B-Line cable tray bend carry any certification marking?
It carries a CE marking. That's the certification held on record for the 4A-24-90VI48 aluminum vertical inside bend.
How fast can I get the B-LINE 4A-24-90VI48 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-24-90VI48 come with a warranty?
Absolutely. The B-LINE 4A-24-90VI48 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-24-90VI48?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-24-90VI48 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!