Eaton B-Line series imperial cable tray and ladder, 6" Height, 15" Length, 24" Width, Series 2-5 vertical tee down, Aluminum, 12" Radius
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Product Height:
- 6 in
- Product Length Depth:
- 15 in
- Product Weight:
- 21.9 lb
- Product Width:
- 24 in
- Radius:
- 12 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 vertical tee down
- Product Details:
- Series 2-5 vertical tee down
- Product Material:
- Aluminum
- Product Length:
- 15 in
B-LINE 6A-24-VT12 – Frequently Asked Questions
1) What does a B-Line 6A-24-VT12 vertical tee down do in a cable tray run?
It is a three-way aluminum fitting that takes a horizontal cable tray run and drops a branch downward while the main run continues straight through. B-Line part 6A-24-VT12 is built for 24 inch wide, 6 inch deep Series 2-5 tray and turns the drop on a 12 inch radius, which is what keeps cable bend radius under control at the transition.
2) Is this cable tray fitting UL classified?
Yes. The 6A-24-VT12 vertical tee down is UL Classified, which is typically what an electrical inspector or a facility spec calls for on tray used as an equipment grounding path or in a listed system.
3) Why choose aluminum cable tray fittings instead of steel?
Aluminum is the lighter option and the usual pick for corrosion-prone areas and for runs where crew handling on a lift matters. This tee weighs 21.9 lb at 24 inch width, which one person can set. If your run is galvanized or stainless steel tray, stay in that material rather than mixing in this aluminum fitting.
4) How much room do I need to allow for a 12 inch radius vertical tee down?
Plan for the fitting's 15 inch length along the main run plus vertical clearance for the 12 inch radius drop below the tray elevation. Tight ceilings, duct crossings and sprinkler mains are where this gets caught, so check the drop zone before you set your hangers.
5) Does the 6A-24-VT12 tee come with splice plates and hardware?
Order splice plates and connection hardware separately, along with a hanger or trapeze support at the fitting. Cable tray fittings in the B-Line Series 2-5 imperial line are supplied as the formed aluminum fitting itself; the 6A-24-VT12 is one piece.
6) What is the manufacturer part number for this 24 inch aluminum vertical tee down?
The Eaton B-Line part number is 6A-24-VT12. Reading it out: 6 inch rail depth, aluminum, 24 inch width, vertical tee with a 12 inch radius.
How fast can I get the B-LINE 6A-24-VT12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-24-VT12 come with a warranty?
Absolutely. The B-LINE 6A-24-VT12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-24-VT12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-24-VT12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.