Eaton B-Line series imperial cable tray and ladder, 6" Height, 18.44" Length, 30" Width, 30" and 12" Tray widths, Series 2-5 right reducer, Aluminum
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Product Height:
- 6 in
- Product Length Depth:
- 18.44 in
- Product Weight:
- 6.7 lb
- Product Width:
- 30 in
- Special Features:
- 30" & 12" Tray widths
- Department:
- Electrical
- Product Type:
- Series 2-5 right reducer
- Product Details:
- Series 2-5 right reducer
- Product Material:
- Aluminum
B-LINE 6A-30-RR12 – Frequently Asked Questions
1) What does the Eaton B-Line 6A-30-RR12 right reducer connect?
The 6A-30-RR12 is a right-hand reducer for aluminum cable tray, joining a 30 inch wide tray to a 12 inch wide tray in a 6 inch deep (loading depth) run. The reduction happens on the right side, so the left siderail runs straight through and the right rail steps in. Overall it measures 18.44 inches long and 30 inches wide.
2) Is this reducer left-hand or right-hand, and does it matter which one I order?
It matters, and this one is the right reducer. On a right reducer the offset is on the right side of the run; a left reducer mirrors it. Order by the side the tray needs to step in on as you look along the direction of the run, because the two are not interchangeable in a run where cables have to stay on one side.
3) Will this reducer work with a steel cable tray run?
It is built from aluminum, so it is meant for aluminum tray systems. Mixing aluminum fittings into a steel run raises galvanic corrosion and bonding concerns, and the siderail profiles differ between materials. For a steel run, use a steel reducer of the same series and depth.
4) Do splice plates and hardware come with this cable tray reducer?
What ships is the reducer fitting itself, described as a Series 2-5 right reducer in aluminum. Plan on ordering the splice plates, bolts and nuts for both ends, plus any hangers or trapeze supports needed at the transition, as separate line items.
5) How much straight run length does a 30 to 12 inch reducer take up in my layout?
Allow 18.44 inches of run for the transition. That is the fitting's length, so on a congested ceiling measure from the last straight section and confirm you have that much clear before the next support, fitting or obstruction.
6) How much does this 30 inch to 12 inch cable tray reducer weigh for handling and support spacing?
6.7 lb. Light enough for one person to set in place on a ladder, and because aluminum fittings weigh a fraction of steel, the reducer itself adds little to the load on the adjacent hangers. Support it per the tray run's normal support spacing at the transition point.
How fast can I get the B-LINE 6A-30-RR12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-30-RR12 come with a warranty?
Absolutely. The B-LINE 6A-30-RR12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-30-RR12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-30-RR12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.