Eaton B-Line series imperial cable tray and ladder, 6" Height, 18.44" Length, 24" Width, 24" and 6" Tray widths, Series 2-5 right reducer, Aluminum
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Product Height:
- 6 in
- Product Length Depth:
- 18.44 in
- Product Weight:
- 6.053 lb
- Product Width:
- 24 in
- Special Features:
- 24" & 6" Tray widths
- Department:
- Electrical
- Product Type:
- Series 2-5 right reducer
- Product Details:
- Series 2-5 right reducer
- Product Material:
- Aluminum
B-LINE 6A-24-RR06 – Frequently Asked Questions
1) What does the Eaton B-Line 6A-24-RR06 reducer actually do in a cable tray run?
It is a right-hand reducer fitting that steps a 24 inch wide tray down to a 6 inch wide tray. The offset is taken on one side, so the run's left side rail stays in line and the reduction happens on the right. Rail height through the fitting is 6 inches and the fitting measures 18.44 inches along the run.
2) Do I need a left reducer instead of this one?
Reducers are handed. The 6A-24-RR06 is the right-hand version, meaning the width reduction is taken on the right side rail while the left side runs straight through. If your tray has to hold its line on the right side, order the left reducer. If the drop needs to be split evenly across both rails, a straight (centered) reducer is the part to specify, not this one.
3) Why choose aluminum for this tray reducer instead of steel?
The 6A-24-RR06 is aluminum and weighs 6.053 lb for a 24 inch to 6 inch reducer, which is light enough for one person to set and bolt off a ladder. Aluminum also holds up better in damp, coastal, and washdown environments than painted steel. Where the run needs higher load capacity or the spec calls for steel throughout, a steel reducer of the same width step is the right call rather than mixing materials mid-run.
4) How much length do I need to allow in my layout for this 24 inch to 6 inch reducer?
Allow 18.44 inches of straight run for the fitting itself, measured along the tray, plus whatever your splice plates and supports require on each side. Overall footprint is 18.44 inches long by 24 inches wide at the large end, with 6 inch side rails.
5) What is the exact part number for the B-Line right reducer that goes from 24 inch to 6 inch tray?
Order Eaton B-Line model 6A-24-RR06. The prefix reflects the 6 inch rail height and aluminum construction, 24 is the incoming tray width, RR is right reducer, and 06 is the reduced width.
How fast can I get the B-LINE 6A-24-RR06 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-24-RR06 come with a warranty?
Absolutely. The B-LINE 6A-24-RR06 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-24-RR06?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-24-RR06 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.