Eaton B-Line series imperial cable tray and ladder, 4" Height, 18.44" Length, 24" Width, 24" and 6" Tray widths, Series 2-5 right reducer, Aluminum
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Product Height:
- 4 in
- Product Length Depth:
- 18.44 in
- Product Weight:
- 4.9 lb
- Product Width:
- 24 in
- Special Features:
- 24" & 6" Tray widths
- Department:
- Electrical
- Product Type:
- Series 2-5 right reducer
- Product Details:
- Series 2-5 right reducer
- Product Material:
- Aluminum
B-LINE 4A-24-RR06 – Frequently Asked Questions
1) What does the B-Line 4A-24-RR06 right reducer actually connect?
It steps a 24 inch wide cable tray run down to a 6 inch wide run, and the reduction is taken on the right hand side so one side rail stays in line while the other angles in. Overall it measures 4 inches high, 18.44 inches long and 24 inches wide, and it is aluminum.
2) Do I need a left reducer or a right reducer for my tray run?
Look down the run in the direction of the reduction. Model 4A-24-RR06 is the right reducer, meaning the narrower 6 inch tray offsets toward the right side rail; the left version keeps the reduction on the opposite rail. If you need the narrow section centered rather than offset, that is a straight (center) reducer, a different fitting altogether.
3) Can I use this to reduce from 24 inch tray to a width other than 6 inch?
No. This fitting is made specifically for a 24 inch to 6 inch transition. Reducing 24 inch tray to 9, 12, 18 or any other width takes the reducer built for that pair of widths, so match the fitting to both the incoming and outgoing tray widths when you order.
4) Is this aluminum reducer suitable for an outdoor or corrosive area tray run?
The fitting is aluminum, which is the usual choice for wet, outdoor and mildly corrosive environments because it doesn't rely on a coating for corrosion resistance. It also keeps the piece light at 4.9 pounds, which matters when you're setting fittings overhead on a ladder.
5) Is this cable tray reducer UL listed for an inspected commercial job?
It is UL Classified. That is the designation carried on this B-Line reducer, and it's what an inspector on a commercial or institutional job will be looking for on the fitting as well as the straight sections.
6) Does the reducer come with splice plates and hardware to tie into the tray?
Order the connection hardware separately. The 4A-24-RR06 is the reducer section itself; splice plates, bolts and any hold-down or support hardware for the transition point are not part of the fitting.
How fast can I get the B-LINE 4A-24-RR06 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-24-RR06 come with a warranty?
Absolutely. The B-LINE 4A-24-RR06 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-24-RR06?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-24-RR06 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.