Eaton B-Line series imperial cable tray and ladder, 6" Height, 16.72" Length, 24" Width, 24" and 9" Tray widths, Series 2-5 right reducer, Aluminum
Manufacturer Resources
Product Specs
- Certifications:
- CE
- Product Height:
- 6 in
- Product Length Depth:
- 16.72 in
- Product Weight:
- 5.7 lb
- Product Width:
- 24 in
- Special Features:
- 24" & 9" Tray widths
- Department:
- Electrical
- Product Type:
- Series 2-5 right reducer
- Product Details:
- Series 2-5 right reducer
- Product Material:
- Aluminum
B-LINE 6A-24-RR09 – Frequently Asked Questions
1) What does the Eaton B-Line 6A-24-RR09 reducer actually connect?
It is a right reducer that transitions a 24 inch wide cable tray run down to a 9 inch wide run. The reduction happens on the right side, so the left side rail stays in line and the offset is taken up on the right. Overall it measures 6 inches high, 16.72 inches long and 24 inches wide.
2) Is this reducer left hand or right hand, and does it matter which I order?
Handing matters. The 6A-24-RR09 is the right reducer, meaning the width change is taken on the right side rail when you face the run. If your reduction needs to happen on the opposite side, or you need the taper centered, you need a different reducer from the series, not this one.
3) Can I mix this aluminum reducer into a steel cable tray run?
Keep the run in one material where you can. The 6A-24-RR09 is aluminum, and bolting aluminum fittings to steel tray puts dissimilar metals in contact, which invites galvanic corrosion at the splice and complicates the bonding path if the tray is used as an equipment grounding conductor. Match the reducer to the tray material of the run.
4) What is the exact part number to order for the B-Line 24 to 9 inch right reducer?
Order Eaton B-Line model 6A-24-RR09. The number reads out as the fitting itself: 6 inch height, aluminum, 24 inch inlet width, right reducer to 9 inches.
5) How much does the 24 inch B-Line aluminum tray reducer weigh for overhead install?
5.7 pounds. Light enough for one person to hold in place on a trapeze or threaded rod hanger while the splice bolts go in, which is one of the practical reasons crews spec aluminum tray on long overhead runs.
6) Does the B-Line 6A-24-RR09 reducer carry any certification marking?
It is CE marked. That is the certification stated for this aluminum reducer; if your specification calls for another listing mark, verify against the submittal for the full tray system rather than the fitting alone.
How fast can I get the B-LINE 6A-24-RR09 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-24-RR09 come with a warranty?
Absolutely. The B-LINE 6A-24-RR09 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-24-RR09?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-24-RR09 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.