B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,847.84
B-Line Eaton series imperial cable tray and ladder, 6" Height, 24" Length, 18" Width, 18" and 36" Tray widths, Series 2-5 horizontal expanding tee, Al

B-Line Eaton series imperial cable tray and ladder, 6" Height, 24" Length, 18" Width, 18" and 36" Tray widths, Series 2-5 horizontal expanding tee, Al

(No reviews yet) Write a Review

Model: 6A-18-36-HT12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,847.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" Height, 24" Length, 18" Width, 18" and 36" Tray widths, Series 2-5 horizontal expanding tee, Aluminum, 12" Radius

Manufacturer Resources

Product Specs

Certifications:
CE
Product Height:
6 in
Product Length Depth:
24 in
Product Weight:
23.29 lb
Product Width:
18 in
Radius:
12 in
Special Features:
18" & 36" Tray widths
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Tees / Crosses
Product Type:
Series 2-5 horizontal expanding tee
Product Details:
Series 2-5 horizontal expanding tee
Product Material:
Aluminum

B-LINE 6A-18-36-HT12 – Frequently Asked Questions

1) What tray widths does the Eaton B-Line 6A-18-36-HT12 expanding tee connect?
The 6A-18-36-HT12 horizontal tee is an expanding tee, meaning it joins runs of two different widths: 18 inch and 36 inch tray. That is what the 18-36 in the model number refers to. If both of your runs are the same width, this is not the fitting you want, you need a straight (non-expanding) horizontal tee in that single width.
2) What is the bend radius on the B-Line 6A-18-36-HT12 cable tray tee?
It is a 12 inch radius fitting. That matters because the radius has to be at least the minimum bend radius of the largest cable you are pulling through the tee, and because radius sets how much room the fitting takes in the ceiling space. Mixing radii across a run is fine mechanically, but pull calculations are done off the tightest one.
3) Is this B-Line cable tray tee aluminum or steel?
Aluminum. That keeps the fitting light for overhead work (it weighs about 23.29 lb) and suits it to runs where weight on the supports or corrosion resistance matters. It should be matched to aluminum tray of the same series rather than mixed with a steel ladder run, since the side rail profiles and splice plates differ between materials.
4) How much space does this horizontal tee take up in the run?
Plan for 24 inches of length and 18 inches of width on the fitting itself, at 6 inches deep, with a 12 inch radius on the turn. Lay that out against your straight sections before you set hangers, since supports typically land on both sides of a fitting rather than under it.
5) Does the B-Line 6A-18-36-HT12 tee carry any certification marking?
It carries a CE marking. For a fitting going into a US commercial or industrial job, the governing items are usually the tray system listing and the NEC Article 392 support and fill rules for the run as a whole, so specify the fitting to match the series and material of the tray already approved on the drawing.
6) Can one electrician handle this cable tray tee overhead?
At 23.29 lb the aluminum tee is a manageable overhead lift for one person from a lift or platform, though most crews set fittings with two hands on it while a second person starts the splice bolts. Splice plates and hardware are ordered separately to match the series, so have those on the cart before you go up.
How fast can I get the B-LINE 6A-18-36-HT12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-18-36-HT12 come with a warranty?
Absolutely. The B-LINE 6A-18-36-HT12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-18-36-HT12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-18-36-HT12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!