B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$900.79
B-Line Eaton series imperial cable tray and ladder, 6" Height, 26.692" Length, 24" Width, Series 2-5 vertical inside bend, Aluminum, 30° Angle, 36" Ra

B-Line Eaton series imperial cable tray and ladder, 6" Height, 26.692" Length, 24" Width, Series 2-5 vertical inside bend, Aluminum, 30° Angle, 36" Ra

(No reviews yet) Write a Review

Model: 6A-24-30VI36
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$900.79
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" Height, 26.692" Length, 24" Width, Series 2-5 vertical inside bend, Aluminum, 30° Angle, 36" Radius

Manufacturer Resources

Product Specs

Angle:
30°
Certifications:
CE
Product Height:
6 in
Product Length Depth:
26.692 in
Product Weight:
11.4 lb
Product Width:
24 in
Radius:
36 in
Department:
Electrical
Product Type:
Series 2-5 vertical inside bend
Product Details:
Series 2-5 vertical inside bend
Product Material:
Aluminum

B-LINE 6A-24-30VI36 – Frequently Asked Questions

1) What is a 30 degree vertical inside bend used for on a cable tray run?
A vertical inside bend carries a cable tray run through a change in elevation where the tray bends toward the inside of the curve, such as dropping a run under an obstruction or following a sloped ceiling. The Eaton B-Line 6A-24-30VI36 turns the run 30 degrees on a 36 inch radius, so the cables keep a generous bending radius through the transition rather than being forced over a sharp corner.
2) Should I use an inside bend or an outside bend for my cable tray elevation change?
It depends which way the tray curves relative to the cables resting in it. An inside bend, like the 6A-24-30VI36, sweeps so the cables bear on the inside of the curve, used where the run drops away or rises with the load side on the concave face. If your run breaks the other direction, you need the matching vertical outside bend of the same width, depth, angle and radius. Ordering the wrong one leaves the fitting facing backwards and no amount of rotation fixes it.
3) How much length does this 30 degree bend take up in my tray run?
Figure 26.692 inches of overall length for the fitting itself. That is the dimension to deduct from your straight run when you lay out the elevation change, and it is set by the 36 inch radius and the 30 degree sweep. Cut your adjoining straight sections to suit after the fitting is located.
4) Do splice plates come with this cable tray bend?
The order covers the 24 inch wide aluminum 30 degree vertical inside bend itself. Splice plates, hardware and hangers for joining it to the straight sections are separate items, so add them to your material list along with the adjoining straight lengths.
5) What part number do I order for the 24 inch, 6 inch deep, 30 degree aluminum inside bend?
Eaton B-Line part number 6A-24-30VI36. Read it as 6 inch rail, 24 inch width, 30 degree vertical inside bend, 36 inch radius, which is exactly what the fitting measures.
6) How heavy is this cable tray bend for a one-man overhead install?
The fitting weighs 11.4 lb, which is light enough for one electrician to set on trapeze hangers overhead. That is a benefit of the aluminum construction over steel at the same 24 inch width.
7) Is aluminum cable tray suitable for a damp or corrosive area?
Aluminum is the usual choice where moisture or mildly corrosive atmospheres would attack plain or painted steel, and it does not need galvanizing to hold up. The 6A-24-30VI36 bend is aluminum throughout. It is also non-magnetic, which is why aluminum tray gets specified for runs where induced heating in the tray is a concern.
8) Does this Eaton B-Line tray bend carry any certification marking?
It carries the CE marking. That is the marking stated for the 6A-24-30VI36 aluminum vertical inside bend.
How fast can I get the B-LINE 6A-24-30VI36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-24-30VI36 come with a warranty?
Absolutely. The B-LINE 6A-24-30VI36 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-24-30VI36?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-24-30VI36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!