You may also like
B-Line Eaton series imperial cable tray and ladder, 6" Height, 27" Length, 24" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
Model: BLN-6A-24-VTU24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 27" Length, 24" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
B-LINE
$4,386.23
B-Line Eaton series imperial cable tray and ladder, 6" Height, 27" Length, 6" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
Model: BLN-6A-06-VTU24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 27" Length, 6" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
B-LINE
$4,121.97
B-Line Eaton series imperial cable tray and ladder, 4" Height, 27" Length, 12" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
Model: BLN-4A-12-VTU24
Eaton B-Line series imperial cable tray and ladder, 4" Height, 27" Length, 12" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
B-LINE
$3,562.61
B-Line Eaton series imperial cable tray and ladder, 6" Height, 27" Length, 30" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
Model: BLN-6A-30-VTU24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 27" Length, 30" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
B-LINE
$4,775.86
B-Line Eaton series imperial cable tray and ladder, 6" Height, 27" Length, 18" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
Model: BLN-6A-18-VTU24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 27" Length, 18" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
B-LINE
$4,179.84
Eaton B-Line series imperial cable tray and ladder, 6" Height, 27" Length, 12" Width, Series 2-5 vertical tee up, Aluminum, 24" Radius
Manufacturer Resources
Product Specs
- Certifications:
- CE
- Product Height:
- 6 in
- Product Length Depth:
- 27 in
- Product Weight:
- 29 lb
- Product Width:
- 12 in
- Radius:
- 24 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 vertical tee up
- Product Details:
- Series 2-5 vertical tee up
- Product Material:
- Aluminum
B-LINE 6A-12-VTU24 – Frequently Asked Questions
1) What does a B-Line 6A-12-VTU24 vertical tee up actually do in a cable tray run?
It is a three-way aluminum cable tray fitting that lets a straight run branch upward. The tee section turns the tray vertically on a 24 inch radius while the run continues through, so you can drop or raise a branch to a higher tier without cutting and field-bending tray. It is sized for 12 inch wide, 6 inch deep Series 2-5 tray.
2) How much room do I need above the tray to install a 24 inch radius vertical tee up?
Plan the clearance around a 24 inch bend radius plus the fitting's 27 inch overall length along the run. The generous radius is what protects large-diameter power cable from exceeding its minimum bend radius as it rises, but it also means a tight ceiling or a close overhead obstruction can rule it out. Tighter-radius vertical fittings exist in the same series if headroom is the constraint.
3) Is this an aluminum or steel cable tray fitting, and where can I use it?
Aluminum. That keeps the 29 pound handling weight down for a fitting this size and suits it to damp or corrosive interior and exterior runs where galvanized steel would be the heavier, more corrosion-prone choice. Keep the whole run in one material so bonding and thermal movement stay consistent.
4) What does the 6A-12-VTU24 weigh for rigging and support planning?
29 pounds. It is a two-man lift on a ladder at height, and it wants a hanger or trapeze support on each side of the fitting rather than relying on the adjacent straight sections to carry it.
5) Is a vertical tee up the right fitting, or do I want a vertical elbow?
Use a vertical tee up when the run has to continue straight AND branch upward from the same point. If the run simply changes elevation and does not continue, a vertical inside or outside elbow is the correct part. Ordering the tee where an elbow belongs leaves an open, unused branch you then have to blank off.
6) What part number do I quote for a 12 inch, 6 inch deep aluminum vertical tee up with a 24 inch radius?
Eaton B-Line manufacturer part number 6A-12-VTU24. The number reads out as 6 inch rail, aluminum, 12 inch width, vertical tee up, 24 inch radius, which is how the rest of the Series 2-5 fitting line is designated.
7) Does the B-Line 6A-12-VTU24 carry any certification?
It is CE marked. No other rating is carried on the aluminum Series 2-5 vertical tee up.
How fast can I get the B-LINE 6A-12-VTU24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-12-VTU24 come with a warranty?
Absolutely. The B-LINE 6A-12-VTU24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-12-VTU24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-12-VTU24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.