You may also like
B-Line Eaton series imperial cable tray and ladder, 6" Height, 27.000" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" R
Model: BLN-6A-24-90VO24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 27.000" Length, 24" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" Radius
B-LINE
$1,741.76
B-Line Eaton series imperial cable tray and ladder, 6" Height, 27.000" Length, 18" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" R
Model: BLN-6A-18-90VO24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 27.000" Length, 18" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" Radius
B-LINE
$1,583.60
B-Line Eaton series imperial cable tray and ladder, 6" Height, 27.000" Length, 6" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" Ra
Model: BLN-6A-06-90VO24
Eaton B-Line series imperial cable tray and ladder, 6" Height, 27.000" Length, 6" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" Radius
B-LINE
$1,317.41
B-Line Eaton series imperial cable tray and ladder, 4" Height, 27.000" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" R
Model: BLN-4A-36-90VO24
Eaton B-Line series imperial cable tray and ladder, 4" Height, 27.000" Length, 36" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" Radius
B-LINE
$1,379.14
B-Line Eaton series imperial cable tray and ladder, 4" Height, 27.000" Length, 18" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" R
Model: BLN-4A-18-90VO24
Eaton B-Line series imperial cable tray and ladder, 4" Height, 27.000" Length, 18" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" Radius
B-LINE
$1,093.67
Eaton B-Line series imperial cable tray and ladder, 6" Height, 27.000" Length, 30" Width, Series 2-5 vertical outside bend, Aluminum, 90° Angle, 24" Radius
Manufacturer Resources
Product Specs
- Angle:
- 90°
- Certifications:
- CE
- Product Height:
- 6 in
- Product Length Depth:
- 27 in
- Product Weight:
- 14.6 lb
- Product Width:
- 30 in
- Radius:
- 24 in
- Department:
- Electrical
- Product Type:
- Series 2-5 vertical outside bend
- Product Details:
- Series 2-5 vertical outside bend
- Product Material:
- Aluminum
- Product Length:
- 27 in
B-LINE 6A-30-90VO24 – Frequently Asked Questions
1) What does a 90 degree vertical outside bend do in a cable tray run?
A vertical outside bend carries the tray run over an obstruction or up a wall, turning the tray 90 degrees on the vertical plane with the rungs on the outside of the curve. Eaton B-Line part 6A-30-90VO24 is the aluminum version for 6 inch deep, 30 inch wide Series 2-5 tray, formed on a 24 inch radius. If your run has to drop or rise on the inside of the curve instead, you want a vertical inside bend, not this fitting.
2) Will the 6A-30-90VO24 bend match my existing 30 inch cable tray?
It is sized for 30 inch wide, 6 inch deep tray in the Eaton B-Line Series 2-5 aluminum line. If your straight sections are a different width or a different loading depth, the side rails will not line up and you need the matching width fitting instead. Material matters too: this fitting is aluminum, so pair it with aluminum tray rather than mixing into a steel run.
3) How do I make sure I order the right cable tray bend the first time?
Five things decide it: plane and direction (vertical outside here, not inside or horizontal), angle (90 degrees), tray width (30 inches), tray depth or loading height (6 inches), and radius (24 inches). Get all five matching your run and the part is 6A-30-90VO24 in aluminum. Change any one of them and it is a different part number.
4) How much space do I need to fit a 24 inch radius vertical bend?
Plan the clearance off the 24 inch radius and the 27 inch overall length of the fitting. That length is what the bend occupies along the run before your next straight section starts, so a tight ceiling pocket or a beam close to the turn can force you to a shorter radius fitting. Lay it out before you hang the trapeze supports.
5) Does the Eaton B-Line 6A-30-90VO24 bend come with splice plates or hardware?
The 6A-30-90VO24 is the bend section itself. Splice connectors and their hardware are what join it to the straight tray on each end, so order the splice plates for Series 2-5 aluminum tray separately, two sets per fitting, along with any hangers or trapeze supports the turn needs.
6) Is this cable tray bend CE marked for a spec that requires it?
CE is the certification carried on this Eaton B-Line aluminum vertical outside bend. If your drawing calls out other listings or approvals, confirm those against the submittal package before you release the order.
How fast can I get the B-LINE 6A-30-90VO24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-30-90VO24 come with a warranty?
Absolutely. The B-LINE 6A-30-90VO24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-30-90VO24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-30-90VO24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.