B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,214.31
B-Line Eaton series imperial cable tray and ladder, 6" Height, 30.5625" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 60° Angle, 12" Radius

B-Line Eaton series imperial cable tray and ladder, 6" Height, 30.5625" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 60° Angle, 12" Radius

(No reviews yet) Write a Review

Model: 6A-36-60HB12
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,214.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" Height, 30.5625" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 60° Angle, 12" Radius

Manufacturer Resources

Product Specs

Angle:
60°
Certifications:
CE
Product Height:
6 in
Product Length Depth:
30.5625 in
Product Weight:
12.295 lb
Product Width:
36 in
Radius:
12 in
Department:
Electrical
Product Type:
Series 2-5 horizontal bend
Product Details:
Series 2-5 horizontal bend
Product Material:
Aluminum
Product Length:
30.562 in

B-LINE 6A-36-60HB12 – Frequently Asked Questions

1) What size cable tray does the B-Line 6A-36-60HB12 horizontal bend fit?
The Eaton B-Line 6A-36-60HB12 is a horizontal bend sized for 36 inch wide, 6 inch deep aluminum cable tray in the Series 2-5 line. Match both the width and the rail height on the straight sections it ties into, or the side rails will not line up at the splice.
2) How much space do I need to lay out a 60 degree 36 inch cable tray bend?
Allow for an overall run length of 30-9/16 inches across the fitting, with 36 inches of tray width and a 12 inch turning radius. Lay that out on the ceiling grid before you set your trapeze hangers, because a bend of this width sweeps well past the centerline of the straight run.
3) Is this cable tray bend aluminum or steel, and can I use it outdoors?
Aluminum. That is the usual choice where weight matters or where a steel tray would corrode, and it keeps the fitting light enough for one person to set on the hangers. Bond and ground it as part of the tray system the same way you would the straight sections.
4) How much does the B-Line 6A-36-60HB12 bend weigh for hanger and support calculations?
12.295 lb for the fitting itself. Add that to your conductor fill when you size trapeze hangers and rod at the turn, since a bend concentrates load at a point where two runs meet rather than spreading it along a straight span.
5) What part number do I order for a 36 inch aluminum 60 degree horizontal bend from Eaton B-Line?
Order catalog number 6A-36-60HB12. The number reads out as 6 inch rail height, 36 inch width, 60 degree horizontal bend, 12 inch radius, which is how the rest of the Series 2-5 fittings are numbered too.
6) Does this B-Line cable tray bend carry any certification for a European spec job?
It is CE marked. If your submittal calls out a different listing or agency approval, confirm that against the approved product list for the project before releasing the order.
How fast can I get the B-LINE 6A-36-60HB12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-36-60HB12 come with a warranty?
Absolutely. The B-LINE 6A-36-60HB12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-36-60HB12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-36-60HB12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!