B-Line Eaton series imperial c...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,667.27
B-Line Eaton series imperial cable tray and ladder, 6" Height, 40.9375" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 60° Angle, 24" Radius

B-Line Eaton series imperial cable tray and ladder, 6" Height, 40.9375" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 60° Angle, 24" Radius

(No reviews yet) Write a Review

Model: 6A-36-60HB24
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,667.27
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series imperial cable tray and ladder, 6" Height, 40.9375" Length, 36" Width, Series 2-5 horizontal bend, Aluminum, 60° Angle, 24" Radius

Manufacturer Resources

Product Specs

Angle:
60°
Certifications:
CE
Product Height:
6 in
Product Length Depth:
40.9375 in
Product Weight:
16.6 lb
Product Width:
36 in
Radius:
24 in
Department:
Electrical
Product Type:
Series 2-5 horizontal bend
Product Details:
Series 2-5 horizontal bend
Product Material:
Aluminum
Product Length:
40.938 in

B-LINE 6A-36-60HB24 – Frequently Asked Questions

1) What size cable tray does the B-Line 6A-36-60HB24 horizontal bend fit?
It matches a 36 inch wide, 6 inch deep aluminum cable tray run. Both the width and the side rail height have to match the straight sections it ties into, so use it only where the run is 36 inch load width with 6 inch rails. If your run is a different width or rail depth, you need the corresponding bend for that size.
2) How much room do I need to lay out a 60 degree, 24 inch radius cable tray bend?
Plan for a 24 inch inside radius on the turn and an overall fitting dimension of 40.9375 inches along its length. That radius is what keeps cable bending within limits on the turn, so the wider the conductors, the more you want that 24 inch sweep rather than a tighter fitting. Check the surrounding steel and ductwork clearance before hanging it.
3) Is this cable tray bend aluminum or steel, and does that matter for my install?
Aluminum. At 16.6 lb for a 36 inch wide fitting it is light enough for one person to set on the hangers, and aluminum is the usual pick for corrosion resistance in damp or coastal work. If your run is galvanized steel tray, keep the fitting material consistent with the run and watch dissimilar metal contact at the splice points.
4) Does this horizontal bend change elevation as well as direction?
No, it only turns the run sideways. A horizontal bend keeps the tray at the same elevation while changing direction 60 degrees. To go up or down over an obstruction you need a vertical inside or outside bend instead.
5) What is the exact part number to order this B-Line cable tray bend?
Order as B-Line (Eaton) 6A-36-60HB24. The number reads out as 6 inch rail, aluminum, 36 inch width, 60 degree horizontal bend, 24 inch radius, which is how you cross-check it against the tray schedule on the drawings.
6) Do splice plates and hardware come with this cable tray bend?
The 6A-36-60HB24 is supplied as the bend fitting itself. Splice plates, hardware and the hangers or trapeze supports at each side of the fitting are ordered separately, and most specs call for a support close to each end of a bend rather than relying on the adjoining straights to carry it.
7) Does this Eaton B-Line cable tray bend carry any certification marking?
It carries a CE marking. That is the only marking held on record for the 6A-36-60HB24, so if your submittal calls out a specific listing beyond CE, confirm it against the manufacturer submittal package for the project.
How fast can I get the B-LINE 6A-36-60HB24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-36-60HB24 come with a warranty?
Absolutely. The B-LINE 6A-36-60HB24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-36-60HB24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-36-60HB24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!