You may also like
Eaton B-Line series imperial cable tray and ladder
Manufacturer Resources
Product Specs
- Angle:
- 30°
- Certifications:
- CE
- Product Height:
- 4 IN
- Product Length Depth:
- 13.692 IN
- Product Weight:
- 6.362 LB
- Product Width:
- 36 IN
- Radius:
- 12 IN
- Department:
- Electrical
- Product Type:
- Series 2-5 vertical inside bend
- Product Details:
- Series 2-5 vertical inside bend
- Product Material:
- Aluminum
- Product Length:
- 13.692 in
B-LINE 4A-36-30VI12 – Frequently Asked Questions
1) What does the Eaton B-Line 4A-36-30VI12 fitting actually do in a cable tray run?
It is a 30 degree vertical inside bend for Series 2-5 ladder tray. An inside bend takes the run up or down where the tray turns toward the inside of the angle, so the fitting is used where the run drops off a ceiling or rises to a higher elevation. Model number 4A-36-30VI12.
2) Do I need an inside or an outside vertical bend for my tray drop?
Look at which side of the tray the angle closes on. If the tray rails bend toward the cable side, going up and over an obstruction, that is an outside bend. If the run turns so the cables stay on the inside of the angle, coming down off a ceiling into a wall or equipment, that is the inside bend, which is what 4A-36-30VI12 is. Ordering the wrong one leaves the bolt holes and rails facing the wrong way.
3) Is this B-Line cable tray bend aluminum or steel?
Aluminum. That keeps it light for overhead work and suits it to runs where steel would need added corrosion protection. It weighs 6.362 lb, so a single installer can set it while another lands the splice plates.
4) How much length does a 30 degree vertical inside bend add to my tray run?
The fitting measures 13.692 inches on its length/depth dimension, so that is the space to allow in the run between straight sections when you lay out the elevation change. Order your straight lengths short by that amount at the transition.
5) Are splice plates included with this B-Line vertical bend?
The 4A-36-30VI12 is supplied as the bend fitting itself. Splice plates and their hardware connect it to the adjoining straight sections and are ordered separately, matched to the Series 2-5 aluminum rail, so budget a set for each end of the fitting.
6) Does this Eaton B-Line tray fitting carry any certification marking?
It carries the CE marking. That is the certification held on record for this 36 inch aluminum Series 2-5 vertical inside bend.
How fast can I get the B-LINE 4A-36-30VI12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-36-30VI12 come with a warranty?
Absolutely. The B-LINE 4A-36-30VI12 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-36-30VI12?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-36-30VI12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.