You may also like
Eaton B-Line series imperial cable tray and ladder
Manufacturer Resources
Product Specs
- Certifications:
- CSA
- Product Height:
- 4 IN
- Product Length Depth:
- 57 IN
- Product Weight:
- 42.219 LB
- Product Width:
- 36 IN
- Radius:
- 36 IN
- Special Features:
- 36" & 18" Tray widths
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 horizontal reducing tee
- Product Details:
- Series 2-5 horizontal reducing tee
- Product Material:
- Aluminum
B-LINE 4A-36-18-HT36 – Frequently Asked Questions
1) What tray widths does the B-Line 4A-36-18-HT36 horizontal reducing tee connect?
It joins a 36 inch wide run to an 18 inch wide branch. The Eaton B-Line 4A-36-18-HT36 is a Series 2-5 horizontal reducing tee built for 36 inch and 18 inch tray widths, so it does the reduction and the tee in one fitting instead of needing a separate reducer.
2) How much space do I need to allow for this reducing tee in the run?
Lay out 57 inches along the length of the run and 36 inches across for the fitting body, with a 4 inch rail height. That 57 inch dimension is what you deduct from the straight tray sections either side of the tee when you cut your layout.
3) Is this cable tray tee aluminum or steel, and can it go in a damp or corrosive area?
It is aluminum. That gives you a fitting that will not rust in damp plant rooms, parking structures, or coastal exposures where plain steel tray needs galvanizing or paint, and it keeps the piece light enough for two people to set on trapeze hangers.
4) Is this Eaton B-Line cable tray fitting approved for Canadian projects?
It carries CSA certification, so it can be specified on jobs in Canada where CSA-certified cable tray components are called for.
5) Should I use a reducing tee or a straight tee with a separate reducer at this branch?
Use the reducing tee when the branch leaving a 36 inch run is going to be 18 inch tray. It combines both transitions in one piece, so you have fewer splice joints, fewer bolted connections to torque, and a continuous bonding path through a single fitting. A straight tee plus a reducer only makes sense when the reducer has to sit some distance down the branch for clearance reasons.
How fast can I get the B-LINE 4A-36-18-HT36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-36-18-HT36 come with a warranty?
Absolutely. The B-LINE 4A-36-18-HT36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-36-18-HT36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-36-18-HT36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.