You may also like
Eaton B-Line series imperial cable tray and ladder
Manufacturer Resources
Product Specs
- Angle:
- 60°
- Certifications:
- CE
- Product Height:
- 4 IN
- Product Length Depth:
- 51.3125 IN
- Product Weight:
- 18.625 LB
- Product Width:
- 36 IN
- Radius:
- 36 IN
- Department:
- Electrical
- Product Type:
- Series 2-5 horizontal bend
- Product Details:
- Series 2-5 horizontal bend
- Product Material:
- Aluminum
B-LINE 4A-36-60HB36 – Frequently Asked Questions
1) What angle and radius is the 4A-36-60HB36 bend?
Sixty degrees, on a 36 inch radius. That radius is what your cable bend radius calculation has to clear, so if your conductors need a larger sweep you want a bigger radius fitting rather than this one. The 60 degree turn is a fixed factory bend, not adjustable.
2) Is this cable tray bend aluminum or steel?
Aluminum. That keeps the weight down for overhead runs (this fitting is 18.625 lb) and is the usual choice where corrosion is a concern, such as outdoors or in wet process areas. If your run is galvanized steel tray, use a steel bend instead so you are not mixing dissimilar metals at the splice.
3) How much room do I need to lay out this 60 degree tray bend?
Plan on roughly 51-5/16 inches along the overall length of the fitting, with a 36 inch turning radius through the 60 degree sweep. Tight mechanical rooms and congested ceilings are where this gets caught, so check the sweep against ductwork and pipe before you hang the trapeze supports.
4) Do I need extra supports for a horizontal bend in cable tray?
Yes, and it is the detail most often missed. A fitting this size, 36 inches wide on a 36 inch radius and 18.625 lb bare, carries the full cable load through the turn, so support the bend on both sides of the fitting close to the splice points rather than spanning it. Splice plates and hardware are separate items from the bend itself.
5) Does the B-Line 4A-36-60HB36 bend come with splice plates?
The part supplied is the 60 degree horizontal bend fitting itself. Splice plates, bolts, and the hanger or trapeze hardware are ordered separately, so count two splice connections per bend when you build the material list.
6) What is the exact part number to order this 36 inch aluminum 60 degree tray bend?
Order it as Eaton B-Line 4A-36-60HB36. Reading the number: 4 inch depth, aluminum, 36 inch width, 60 degree horizontal bend, 36 inch radius.
7) Is this cable tray fitting CE marked for a spec submittal?
CE is the certification carried on this Eaton B-Line aluminum bend. If your submittal calls for anything beyond that on the fitting, specify it at the tray series level with the straight sections.
How fast can I get the B-LINE 4A-36-60HB36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-36-60HB36 come with a warranty?
Absolutely. The B-LINE 4A-36-60HB36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-36-60HB36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-36-60HB36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.