You may also like
Eaton B-Line series imperial cable tray and ladder
Manufacturer Resources
Product Specs
- Angle:
- 90°
- Certifications:
- CE
- Product Height:
- 4 IN
- Product Length Depth:
- 43.188 IN
- Product Weight:
- 17.8 LB
- Product Width:
- 36 IN
- Radius:
- 36 IN
- Department:
- Electrical
- Product Type:
- Series 2-5 vertical inside bend
- Product Details:
- Series 2-5 vertical inside bend
- Product Material:
- Aluminum
B-LINE 4A-36-90VI36 – Frequently Asked Questions
1) What is the Eaton B-Line 4A-36-90VI36 fitting used for in a cable tray run?
It's a 90 degree vertical inside bend for Eaton B-Line series 2-5 aluminum cable tray. You use it where a horizontal tray run has to turn up or down and the tray fitting wraps the inside of the turn, keeping cable in the tray through the elevation change. It's sized for 36 inch wide tray with a 4 inch side rail height.
2) What bend radius does this B-Line vertical inside bend have, and why does it matter for my cable?
36 inch radius. That's the number to check against your cable manufacturer's minimum bending radius. Large power or fiber runs often call for a wide radius, and a 36 inch inside bend gives you a generous sweep instead of forcing a tight turn at the elevation change.
3) How much space do I need to allow for the 4A-36-90VI36 bend when laying out the run?
Allow for a 43.188 inch overall length on the fitting, 36 inches across, with 4 inch rails. With the 36 inch radius, the turn consumes a lot of room, so confirm your ceiling height or wall clearance before committing the layout.
4) Should I order a vertical inside bend or a vertical outside bend for my tray riser?
It depends which face of the turn the cable rides on. An inside bend, like the 4A-36-90VI36, is used where the tray turns and the cable follows the inner face of the 90 degree turn, typically running along a wall and turning up. An outside bend is the mirror condition, where the cable rides the outer face. Get it backwards and the fitting won't bolt up in the correct orientation, so sketch the elevation before ordering.
5) What is the exact part number to quote for this 36 inch aluminum 90 degree vertical inside bend?
Order Eaton B-Line part 4A-36-90VI36. Reading the code: 4 inch rail, aluminum, 36 inch tray width, 90 degree vertical inside bend, 36 inch radius. Distributors matching a submittal should confirm all four of those against the drawing.
6) Does the B-Line 4A-36-90VI36 carry any certification marking?
It carries a CE marking. No other rating is claimed for this aluminum vertical inside bend.
How fast can I get the B-LINE 4A-36-90VI36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-36-90VI36 come with a warranty?
Absolutely. The B-LINE 4A-36-90VI36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-36-90VI36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-36-90VI36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.