You may also like
Eaton B-Line series imperial cable tray and ladder
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Product Height:
- 4 IN
- Product Length Depth:
- 33 IN
- Product Weight:
- 18.623 LB
- Product Width:
- 12 IN
- Radius:
- 24 IN
- Special Features:
- 12" & 6" Tray widths
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 horizontal reducing tee
- Product Details:
- Series 2-5 horizontal reducing tee
- Product Material:
- Aluminum
B-LINE 4A-12-06-HT24 – Frequently Asked Questions
1) What tray widths does the B-Line 4A-12-06-HT24 horizontal reducing tee connect?
It joins a 12 inch wide tray to a 6 inch wide tray, which is what makes it a reducing tee rather than a straight tee. The main run measures 12 inches wide and 4 inches in side rail height, with an overall length of 33 inches. If both of your branches are the same width, you need a standard horizontal tee instead.
2) Is this cable tray tee aluminum or steel, and does that suit a damp or corrosive area?
The 4A-12-06-HT24 tee is aluminum. Aluminum tray is the usual choice where weight matters or where moisture would attack plain steel, and it is non-magnetic. For heavy chemical exposure or wash-down environments, a fiberglass or stainless run is the alternative. Note that mixing aluminum fittings into a steel tray run is not good practice because of dissimilar metal contact at the splice.
3) Will this reducing tee work in a vertical drop in my cable tray run?
No. This is a horizontal reducing tee, so the branch runs off flat in the same plane as the main tray. For a change in elevation you need a vertical inside or outside elbow, not this fitting.
4) How much does this 12 inch to 6 inch aluminum tray tee weigh for overhead rigging?
18.623 lb. Light enough for one person to set on trapeze hangers, but with a 33 inch overall length and a 24 inch radius, plan support on both sides of the fitting so the joint is not carrying the cable load through the splice plates alone.
5) What is the exact part number to order this Eaton B-Line reducing tee?
Order it as B-Line 4A-12-06-HT24, an Eaton B-Line Series 2-5 aluminum horizontal reducing tee, 12 inch to 6 inch, 4 inch rail height, 24 inch radius.
How fast can I get the B-LINE 4A-12-06-HT24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-12-06-HT24 come with a warranty?
Absolutely. The B-LINE 4A-12-06-HT24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-12-06-HT24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-12-06-HT24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.