You may also like
Eaton B-Line series imperial cable tray and ladder
Manufacturer Resources
Product Specs
- Certifications:
- CE
- Product Height:
- 6 IN
- Product Length Depth:
- 33 IN
- Product Weight:
- 29.63 LB
- Product Width:
- 12 IN
- Radius:
- 24 IN
- Special Features:
- 12" & 30" Tray widths
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 horizontal expanding tee
- Product Details:
- Series 2-5 horizontal expanding tee
- Product Material:
- Aluminum
B-LINE 6A-12-30-HT24 – Frequently Asked Questions
1) What tray widths does the B-Line 6A-12-30-HT24 expanding tee connect?
The 6A-12-30-HT24 horizontal expanding tee is built for 12 inch and 30 inch tray widths, so it takes a 12 inch run into a 30 inch branch (or the reverse) in one fitting instead of forcing a separate reducer. The fitting's own width is listed at 12 inches.
2) Will the 6A-12-30-HT24 fit a 6 inch deep ladder tray run?
Yes, the fitting is 6 inches in loading depth, so it matches a 6 inch deep aluminum ladder or tray run. Side rail depth has to match through the junction or the splice plates will not line up flat.
3) What are the dimensions and weight of the B-Line 6A-12-30-HT24 tee for rigging and support spacing?
Overall it runs 33 inches in length, 12 inches wide, and 6 inches in loading depth, at 29.63 lb. That is a one-man lift but heavy enough at 33 inches of reach that you want hangers landed either side of the fitting before it goes up.
4) Is this B-Line tee aluminum or steel, and is it suitable for a corrosive or outdoor area?
Aluminum. That is the usual choice for wastewater, coastal, food processing and other damp or corrosive environments where painted steel tray corrodes, and it cuts the weight of an overhead run substantially. It is not the pick where you need the higher load capacity of a steel tray system.
5) Do splice plates and hardware come with the B-Line 6A-12-30-HT24 tee?
The order covers the horizontal expanding tee fitting itself under part number 6A-12-30-HT24. Splice connectors, hangers and mounting hardware are ordered separately, so count the number of joints the tee creates (three) and order splice sets to match.
6) What is the difference between a horizontal expanding tee and a standard horizontal tee in cable tray?
A standard tee joins three runs of the same width. An expanding tee changes width at the junction, and this one is set up for 12 inch and 30 inch widths so the branch or main comes off at a different size. If all three of your runs are the same width, you want a plain horizontal tee instead of this fitting.
7) Does this Eaton B-Line cable tray tee carry any certification marking?
It is CE marked. Nothing further is carried on record for this fitting, so if a project spec calls out another listing, verify against the manufacturer submittal before release.
How fast can I get the B-LINE 6A-12-30-HT24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6A-12-30-HT24 come with a warranty?
Absolutely. The B-LINE 6A-12-30-HT24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6A-12-30-HT24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6A-12-30-HT24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.