You may also like
Eaton B-Line series imperial cable tray and ladder
Manufacturer Resources
Product Specs
- Certifications:
- CE
- Product Height:
- 4 IN
- Product Length Depth:
- 39 IN
- Product Weight:
- 32.5 LB
- Product Width:
- 24 IN
- Radius:
- 24 IN
- Special Features:
- 24" & 36" Tray widths
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Series 2-5 horizontal expanding tee
- Product Details:
- Series 2-5 horizontal expanding tee
- Product Material:
- Aluminum
B-LINE 4A-24-36-HT24 – Frequently Asked Questions
1) What tray widths does the B-Line 4A-24-36-HT24 horizontal expanding tee connect?
The 4A-24-36-HT24 is built for 24 inch and 36 inch tray widths, which is what the "expanding" in horizontal expanding tee refers to: the branch steps between the two widths rather than matching a single one. The fitting itself is catalogued at 24 inches wide. If both your main run and branch are the same width, you want a straight horizontal tee instead of an expanding one.
2) How much does this 24 inch aluminum cable tray tee weigh for support spacing and rigging?
32.5 lb for the fitting itself, before cable fill. Aluminum keeps it light enough for two-man placement at height, but a 24 inch radius expanding tee still wants support on both the main and branch legs close to the fitting so the joint is not carrying the adjacent spans.
3) Why choose aluminum cable tray fittings over steel for an outdoor or wash-down run?
Aluminum, as used on this Eaton B-Line tee, is the usual pick where corrosion and weight drive the decision: it does not need galvanizing to survive damp or coastal exposure, and a 32.5 lb fitting is a lot easier to hang than the steel equivalent. Steel is the choice when you need higher load capacity over long spans. Whichever you pick, keep the run consistent, since mixing aluminum and steel at a bolted joint invites galvanic corrosion.
4) What part number do I order for the B-Line 24 to 36 inch expanding horizontal tee in aluminum?
Order Eaton B-Line MPN 4A-24-36-HT24. The number reads out as the fitting spec: 4 inch depth aluminum, 24 to 36 inch tray widths, horizontal tee, 24 inch radius.
5) Is this a horizontal tee or can I use it for a vertical drop?
Horizontal only. It is a horizontal expanding tee, meaning the branch leaves the main run in the same plane, flat. For a change in elevation you need a vertical inside or outside bend, and for a three-way split in the vertical plane a different fitting entirely.
6) Does the B-Line 4A-24-36-HT24 carry any certification for a European or export project?
It is CE marked, which is what a specifier on an export or EU-destined package usually needs to see on tray fittings.
How fast can I get the B-LINE 4A-24-36-HT24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-24-36-HT24 come with a warranty?
Absolutely. The B-LINE 4A-24-36-HT24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-24-36-HT24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-24-36-HT24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.