You may also like
Eaton B-Line series imperial cable tray and ladder
Manufacturer Resources
Product Specs
- Angle:
- 90°
- Certifications:
- CE
- Product Height:
- 4 IN
- Product Length Depth:
- 39 IN
- Product Weight:
- 12 LB
- Product Width:
- 9 IN
- Radius:
- 36 IN
- Department:
- Electrical
- Product Type:
- Series 2-5 vertical outside bend
- Product Details:
- Series 2-5 vertical outside bend
- Product Material:
- Aluminum
- Product Length:
- 39 in
B-LINE 4A-09-90VO36 – Frequently Asked Questions
1) What does a vertical outside bend do in a cable tray run, and when do I need one instead of an inside bend?
A vertical outside bend carries the tray run over the top of an obstruction or up a wall, with the fitting bending away from the cable side so the cables ride on the outside of the curve. The Eaton B-Line 4A-09-90VO36 is a 90 degree vertical outside bend on a 36 inch radius. If your run has to drop down and the cables would sit on the inside of the curve instead, you want a vertical inside bend, not this fitting.
2) Is this cable tray bend aluminum or steel, and does that matter for a corrosive area?
Aluminum. That is the usual pick for damp, coastal, wastewater or chemical-exposure runs where painted steel would need coating maintenance, and it keeps the fitting light. At 12 pounds one electrician can set it in place on the strut without a lift. If your spec calls for hot dip galvanized or stainless tray, this is not a substitute.
3) Does the B-Line vertical bend come with splice plates and hardware?
The 4A-09-90VO36 is the bend fitting itself, a Series 2-5 vertical outside bend. Splice plates, hardware and any hold-down clamps or supports for the transition are ordered separately, so count the number of joints in your run and add the matching Series 2-5 splice kits to the order.
4) What part number do I order for a 9 inch aluminum 90 degree vertical outside bend on a 36 inch radius?
Eaton B-Line part number 4A-09-90VO36. The number reads out as the configuration: aluminum, 9 inch width, 90 degree vertical outside bend, 36 inch radius. If you need a different radius or width, the corresponding digits in that designation change.
How fast can I get the B-LINE 4A-09-90VO36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4A-09-90VO36 come with a warranty?
Absolutely. The B-LINE 4A-09-90VO36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4A-09-90VO36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4A-09-90VO36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.