B-Line Eaton series JIC panel ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,079.54
Image coming soon

B-Line Eaton series JIC panel enclosure, 14" height, 6" length, 12" width, 4X, Hinged cover, 4XSCHC enclosure, Wall mount, Small single door, Externa

(No reviews yet) Write a Review

Model: 14126-4XSCHC

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,079.54
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series JIC panel enclosure, 14" height, 6" length, 12" width, NEMA 4X, Hinged cover, 4XSCHC enclosure, Wall mount, Small single door, External mounting feet, 304 stainless steel, Seamless poured in-place gasket

Manufacturer Resources

Product Specs

Certifications:
UL 50
Closure Type:
Hinged
Country Of Origin:
United States
Cover Type:
Hinged
Finish Color:
#4 brushed
Mounting Hole Details:
External mounting feet
Mounting Method:
Wall
Nema Rating:
4X
Product Height:
14 in
Product Length Depth:
6 in
Product Weight:
12.8 lb
Product Width:
12 in
Special Features:
Cont. piano hinge,panel mount prov.,s.s.doorclamps
Wall Thickness:
16 gauge
Department:
Electrical
Product Model:
4XSCHC enclosure
Product Color:
Grey
Product Style:
Small single door
Product Material:
304 stainless steel
Product Length:
6 in
Product Length:
6 in

B-LINE 14126-4XSCHC – Frequently Asked Questions

1) Is the B-Line 14126-4XSCHC enclosure rated for outdoor washdown or corrosive areas?
It carries a NEMA 4X rating, so it is built for hose-directed water and corrosion exposure, and the body is 304 stainless steel with a seamless poured in-place gasket. That combination is what makes it usable in food plants, washdown bays, car washes and coastal exterior walls rather than dry indoor-only locations.
2) What are the actual box dimensions of the 14126-4XSCHC JIC enclosure?
The 4XSCHC enclosure measures 14 inches high, 12 inches wide and 6 inches deep. The 6 inch depth is the number to check first: deep-body breakers, relays on DIN rail with wiring above, or anything with a tall stack can run out of room before the door closes on the gasket.
3) Does this enclosure surface mount without drilling through the back of the box?
It ships with external mounting feet for wall mounting, so the fasteners land outside the sealed body. That is what keeps the NEMA 4X seal intact, drilling the back wall for mounting holes would compromise it.
4) Does the 14126-4XSCHC come with knockouts or conduit holes?
No. Like other NEMA 4X stainless JIC enclosures, it is supplied as a sealed body with no prepunched openings, because any hole has to be sealed with a 4X rated fitting to keep the rating. Field drill and use liquidtight or watertight hub fittings, and bring conduit in from the bottom or side where practical rather than the top.
5) Can I mount a back panel inside this B-Line stainless enclosure?
Yes, panel mounting provisions are built in, so a subpanel can be fitted for terminal blocks, DIN rail or a small controller. The panel itself is a separate order item, not part of the enclosure.
6) How does the cover open and latch on the 14126-4XSCHC?
Hinged cover on a continuous piano hinge, secured with stainless steel door clamps. The clamps pull the door evenly onto the gasket, and the piano hinge means there is no lift-off cover to set down in a wet or dirty work area. Plan for door swing clearance beside the box since the cover is not removable.
7) What gauge is the steel, and is it heavy enough for an industrial wall?
The body is 16 gauge 304 stainless and the enclosure weighs 12.8 lb empty. At that weight a couple of properly anchored fasteners per foot into solid substrate handles it, but add the weight of the back panel and devices when sizing anchors in hollow block or drywall.
8) What does the finish look like, is it polished or painted?
Unpainted 304 stainless in a #4 brushed finish, which reads as a grey satin surface. It wipes down for sanitary areas and there is no paint to chip or chalk outdoors.
9) Is this B-Line enclosure made in the USA for a Buy American job?
Country of origin is the United States, which is the documentation a government, school or healthcare procurement file usually needs on domestic-content jobs. Order by manufacturer part number 14126-4XSCHC so the submittal matches.
How fast can I get the B-LINE 14126-4XSCHC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 14126-4XSCHC come with a warranty?
Absolutely. The B-LINE 14126-4XSCHC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 14126-4XSCHC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 14126-4XSCHC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!