B-Line Eaton series JIC panel ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,058.10
Image coming soon

B-Line Eaton series JIC panel enclosure, 6" height, 4" length, 4" width, 4X, Hinged cover, 4XSS6CHC enclosure, Wall mount, Small single door, Externa

(No reviews yet) Write a Review

Model: 644-4XSS6CHC

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,058.10
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series JIC panel enclosure, 6" height, 4" length, 4" width, NEMA 4X, Hinged cover, 4XSS6CHC enclosure, Wall mount, Small single door, External mounting feet, 316 stainless steel, Seamless poured in-place gasket

Manufacturer Resources

Product Specs

Certifications:
UL 50
Closure Type:
Hinged
Country Of Origin:
United States
Cover Type:
Hinged
Finish Color:
#4 brushed
Mounting Hole Details:
External mounting feet
Mounting Method:
Wall
Nema Rating:
4X
Product Height:
6 in
Product Length Depth:
4 in
Product Weight:
3 lb
Product Width:
4 in
Special Features:
Cont. piano hinge,panel mount prov.,s.s.doorclamps
Wall Thickness:
16 gauge
Department:
Electrical
Product Model:
4XSS6CHC enclosure
Product Color:
Grey
Product Style:
Small single door
Product Material:
316 stainless steel

B-LINE 644-4XSS6CHC – Frequently Asked Questions

1) Is the Eaton B-Line 4XSS6CHC enclosure rated for washdown or outdoor corrosive areas?
It carries a NEMA 4X rating and is built from 316 stainless steel, so it handles hosedown, wet locations and corrosive environments such as food processing, marine and chemical areas. The seal is a seamless poured in-place gasket rather than a cut-and-glued strip, which is what keeps the 4X rating intact at the door edge. Certified to UL 50.
2) What are the box dimensions on the B-Line 644-4XSS6CHC junction enclosure?
6 inches high, 4 inches wide, 4 inches deep, a small single-door JIC style box weighing 3 lb. That is a compact size for a single disconnect, a small terminal block group or a sensor junction, not for a full control panel.
3) How does this stainless enclosure mount, and do I lose the NEMA rating drilling mounting holes?
It ships with external mounting feet for wall mounting, so the fasteners go outside the sealed volume and you never drill through the back wall. That keeps the 4X seal untouched. Bolt the feet to the wall or to strut and the enclosure stands off the surface.
4) Can I mount a subpanel inside the 4XSS6CHC enclosure?
Yes, panel mounting provisions are built in, so a back panel can be added for DIN rail, terminal blocks or a small drive. The subpanel itself is a separate item and is not part of the enclosure.
5) Does the door hinge, or is it a screw-on lift-off cover?
Hinged, on a continuous piano hinge running the full door height, and secured with stainless steel door clamps rather than cover screws. Practical difference on a service call: the door swings and stays with the box, and you open it by hand without hunting for loose screws.
6) Does the 4XSS6CHC come with knockouts or conduit holes?
No. JIC-style stainless enclosures like this one are supplied blank so the installer places conduit entries where the run needs them. Any hole you cut must be sealed with a 4X-rated hub or fitting to hold the NEMA 4X rating.
7) What part number do I order for the 6 x 4 x 4 stainless hinged B-Line enclosure?
Order Eaton B-Line 644-4XSS6CHC. The 644 prefix reflects the 6 x 4 x 4 inch size and 4XSS6CHC identifies the 316 stainless 4X hinged-cover series.
8) What gauge is the steel on this B-Line JIC enclosure?
16 gauge throughout. Combined with 316 stainless and a continuous hinge, it is a rigid small box suited to plant floor and exterior locations where a painted steel box would start rusting at the seams.
9) What is the finish on the stainless enclosure, and will it match other 316 boxes on the same wall?
A #4 brushed finish on 316 stainless, so it reads as the standard brushed grey stainless used across industrial and food-plant installations and will sit consistently alongside other #4 brushed boxes. No paint to chip or repaint.
10) Is this B-Line enclosure made in the USA?
Yes, country of origin is the United States, which matters where a project carries domestic-sourcing requirements on electrical equipment.
How fast can I get the B-LINE 644-4XSS6CHC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 644-4XSS6CHC come with a warranty?
Absolutely. The B-LINE 644-4XSS6CHC is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 644-4XSS6CHC?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 644-4XSS6CHC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!