B-Line SB6046084TG Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,311.00
B-Line SB6046084TG Eaton series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 49 mounting spaces, Seismic Zone 4, network bay open duct rack, 11 gauge

B-Line SB6046084TG Eaton series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 49 mounting spaces, Seismic Zone 4, network bay open duct rack, 11 gauge

(No reviews yet) Write a Review

Model: SB6046084TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,311.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 49 mounting spaces, Seismic Zone 4, network bay open duct rack, 11 gauge

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
11 gauge
Mounting Rails:
12-24 panel mounting holes
Product Height:
84 in
Product Length Depth:
84 in
Product Weight:
103 lb
Product Width:
23 in
Special Features:
49 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay open duct rack
Product Details:
Seismic Zone 4, network bay open duct rack
Product Material:
Steel
Product Length:
84 in

B-LINE SB6046084TG – Frequently Asked Questions

1) How many rack units of equipment will the B-Line SB6046084TG hold?
The SB6046084TG open frame rack gives you 49 mounting spaces over an 84 inch tall frame, so you can fill it top to bottom with switches, patch panels and rack-mount servers without stacking a second frame. Width is 23 inches and the frame depth figure is listed at 84 inches.
2) Will my patch panels and switches bolt straight to this rack, or do I need different screws?
The rails are punched with 12-24 panel mounting holes, which is the traditional telco/network thread. Standard 12-24 rack screws and cage-nut-free mounting work directly; if your gear shipped with 10-32 or M6 hardware you will need to swap to 12-24 screws.
3) Is this rack rated for seismic installation in California or other high-risk zones?
It is built as a Seismic Zone 4 network bay open duct rack, Zone 4 being the highest-risk classification under the older UBC zoning used for most West Coast work. The frame is 11 gauge steel and the assembly is UL Listed. Anchoring to the slab per the seismic detail on your drawings is still required.
4) Should I use an open frame rack like this or a fully enclosed cabinet for my MDF?
An open frame two-post bay like the SB6046084TG suits a secured, dedicated telecom room where you want full access to both sides, easy cable dressing through the duct channels, and free convection cooling. Pick an enclosed cabinet instead if the equipment sits in a shared or public space and needs locked doors, or if you need front-to-back forced airflow and dust control. This frame has no doors, sides or locks.
5) How much does the SB6046084TG weigh, and can one person set it up?
The frame weighs 103 lb. At 84 inches tall that is a two-person lift to stand it upright and hold it plumb while the base is anchored. Budget for floor anchors, they are not part of the rack.
6) What is the exact part number to order this Eaton B-Line seismic rack?
Order by MPN SB6046084TG, the Eaton B-Line series 84 inch open frame seismic network bay rack in Telco gray. That single part number covers the frame as described.
7) Does a network bay open duct rack include vertical cable management?
The open duct design of the SB6046084TG builds cable routing channels into the bay itself, which is what separates it from a plain two-post relay rack. Accessories like horizontal managers, shelves, power strips and floor anchors are separate line items.
8) Will this B-Line rack match the gray equipment racks already in our telecom room?
The finish is Telco gray powder coat, the standard shade used across B-Line and most other network bay racks, so it should line up visually with existing telco-gray frames. Steel construction in 11 gauge.
How fast can I get the B-LINE SB6046084TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB6046084TG come with a warranty?
Absolutely. The B-LINE SB6046084TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB6046084TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB6046084TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!