B-Line Eaton series open rack...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,085.33
B-Line Eaton series open racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 49 mounting spaces, Seismic Zone 4, network bay open duct

B-Line Eaton series open racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 49 mounting spaces, Seismic Zone 4, network bay open duct

(No reviews yet) Write a Review

Model: SB6043084TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,085.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 49 mounting spaces, Seismic Zone 4, network bay open duct rack, 11 gauge, ASTM A1011SS

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
11 gauge, ASTM A1011SS
Mounting Rails:
12-24 panel mounting holes
Product Height:
84 in
Product Length Depth:
84 in
Product Weight:
103 lb
Product Width:
23 in
Special Features:
49 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay open duct rack
Product Details:
Seismic Zone 4, network bay open duct rack
Product Material:
Steel

B-LINE SB6043084TG – Frequently Asked Questions

1) How many rack units does the B-Line SB6043084TG open frame rack give me?
The SB6043084TG provides 49 mounting spaces on an 84 inch tall frame, so you can plan for 49U of panel, switch, and patch panel mounting before you start stacking. Width is 23 inches and the frame weighs 103 lb.
2) Do I need cage nuts for this B-Line rack, or is it tapped?
The mounting rails are drilled and tapped with 12-24 panel mounting holes, so equipment bolts straight in with 12-24 screws. No cage nuts or clip nuts needed. If your gear ships with square-hole cage nut hardware, order 12-24 rack screws instead.
3) Is this rack rated for a seismic zone 4 installation?
Yes. The SB6043084TG is built as a Seismic Zone 4 network bay open duct rack, which is what a data center or central office spec in a high seismic region calls for. It is also UL Listed. Seismic performance still depends on anchoring the base to the slab per the job's structural detail.
4) Should I use an open frame rack like this or a fully enclosed cabinet?
An open frame two-post style network bay like the SB6043084TG is the right call when you need maximum cable access and airflow, and physical security is handled by the room itself, typical in telecom closets, MDF/IDF rooms, and central offices. Go with an enclosed cabinet instead when you need lockable access, dust control, or contained hot/cold aisle airflow. The open duct design here is meant to run vertical cable management alongside the bay.
5) What gauge steel is the B-Line network bay rack made from?
11 gauge steel to ASTM A1011SS, finished in Telco gray powder coat. That is the heavy structural gauge typically specified for seismic and loaded network bays rather than light-duty relay racks.
6) How much clearance and floor space do I need for the SB6043084TG?
Plan for a footprint 23 inches wide and 84 inches of vertical height to the top of the frame, and confirm door and ceiling clearance for getting an 84 inch frame upright in the room. At 103 lb it is a two-person set and stand.
7) Will this B-Line rack match the Telco gray equipment racks already in my comm room?
The finish is Telco gray powder coat, the standard color used across telecom central office and equipment room bays, so it lines up visually with existing Telco gray racks and ladder rack. If your room is standardized on black, this frame is not offered in that color.
8) What part number do I order for the B-Line 84 inch seismic network bay?
Order model SB6043084TG from Eaton B-Line. That is the single configuration: steel, Telco gray powder coat, 12-24 tapped rails, 49 mounting spaces, Seismic Zone 4 open duct network bay.
How fast can I get the B-LINE SB6043084TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB6043084TG come with a warranty?
Absolutely. The B-LINE SB6043084TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB6043084TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB6043084TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!