B-Line SB5774108TG Eaton serie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,548.26
B-Line SB5774108TG Eaton series open frame racks, Steel, Telco gray powder coat finish, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, 11 gauge

B-Line SB5774108TG Eaton series open frame racks, Steel, Telco gray powder coat finish, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, 11 gauge

(No reviews yet) Write a Review

Model: SB5774108TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,548.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat finish, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, network bay closed duct rack, 11 gauge

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Mounting Rails:
12-24 panel mounting holes
Product Height:
108 in
Product Length Depth:
108 in
Product Weight:
130 lb
Product Width:
19 in
Special Features:
58 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay closed duct rack
Product Details:
Seismic Zone 4, network bay closed duct rack
Product Style:
Top channel
Product Material:
Steel

B-LINE SB5774108TG – Frequently Asked Questions

1) Will the B-Line SB5774108TG rack work in a Seismic Zone 4 installation?
Yes. The SB5774108TG is built as a Seismic Zone 4 network bay closed duct rack, so it is intended for the highest seismic design category work. It's an 11 gauge steel frame with a top channel style top, and it carries a UL Listed mark.
2) How many rack units does the SB5774108TG open frame rack hold?
58 mounting spaces, on rails drilled with 12-24 panel mounting holes. At 108 inches tall, it is a full-height telco bay, so check your ceiling height and any overhead cable runway or ladder rack before committing.
3) Do I need cage nuts for this Eaton B-Line telco rack, or is it tapped?
The rails come with 12-24 panel mounting holes, which are tapped thread holes, not square cage nut punches. Order 12-24 rack screws; square-hole cage nuts won't apply here. Most legacy telco patch panels and shelves are already drilled for 12-24.
4) Will 19 inch equipment mount in the B-Line SB5774108TG?
Yes. The rack is a 19 inch width frame, the standard EIA panel width, so any 19 inch rack-mount switch, patch panel, or shelf drilled for 12-24 will land on the rails.
5) How much does the SB5774108TG rack weigh and is it a two-person set?
130 lb bare. That is a two-person lift to stand it up, and with a 108 inch height you want it floor-anchored before any gear goes in. Plan anchors sized for a seismic-rated bay per your structural drawings.
6) What is the difference between a closed duct rack and a plain open frame relay rack?
A closed duct rack like the SB5774108TG carries integral vertical duct channels alongside the 19 inch mounting rails, so patch cords are routed and contained inside the bay instead of hanging off the side. A plain open frame relay rack gives you the rails only, and you add separate vertical cable managers. If you are running high-density copper patching, the closed duct version saves you buying managers separately.
7) Is the B-Line SB5774108TG UL Listed for a data center or institutional install?
Yes, it is UL Listed. That is often what a hospital, school district, or government facility spec asks for on rack and frame submittals, alongside the Seismic Zone 4 rating.
8) What finish is the B-Line SB5774108TG, and will it match existing telco racks in my MDF?
Telco gray powder coat over steel, which is the standard telco bay color used across Eaton B-Line series racks and most carrier-room equipment. It should line up visually with existing gray relay racks and duct in the same room.
How fast can I get the B-LINE SB5774108TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5774108TG come with a warranty?
Absolutely. The B-LINE SB5774108TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5774108TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5774108TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!