B-Line Eaton series other enclosure accessories, ANSI 61 gray painted, Used as wiring boxes, junction and pull boxes, Galvanized steel, Surface mount,

It is a complete NEMA Type 1 screw cover junction box, model 1010 SCS, measuring 10 x 10 x 10 inches (height, width, length/depth). The cover fastens to the body with plated pan head combo screws, so the lid comes off with a screwdriver rather than hinging open. Shipping weight is 2.457 lb.

No. NEMA Type 1 is an indoor enclosure rating only, with no protection against rain, dripping water, or hosedown. The 1010 SCS is a Type 1 screw cover box, so keep it in dry indoor locations. For outdoor, damp, or washdown work you need a Type 3R, 4, or 4X enclosure instead.

Surface mount. The box sits flat against the wall or structural surface and is fastened through the back, so you do not need to cut into finished drywall or frame it in like a flush box. That makes it the usual choice for exposed conduit runs in mechanical rooms, warehouses, and back-of-house areas.

Galvanized steel body finished in ANSI 61 gray paint, the standard gray used across most industrial panelboards, control enclosures, and gear, so it blends with existing equipment on a wall. The galvanized base under the paint adds corrosion resistance for dry indoor industrial spaces.

A screw cover box like the 1010 SCS secures its lid with plated pan head combo screws, which means the cover comes fully off when you open it. That is fine for a junction or pull box you terminate once and rarely revisit. If a technician will be in the box regularly for troubleshooting or landing new circuits, a hinged cover enclosure is easier to work in because the door stays captive and you are not chasing loose screws on a ladder.

Order it as Eaton B-Line 1010 SCS. The SCS suffix denotes the screw cover style, and the leading digits give the 10 x 10 nominal face size.