You may also like
B-Line Eaton series runway wall angle support kit, Used to secure cable runway to a wall, Runway wall angle support kit, 6 gauge, ASTM A569 steel, Yel
Model: BLN-SB211305YZ
Eaton B-Line series runway wall angle support kit, Used to secure cable runway to a wall, Runway wall angle support kit, 6 gauge, ASTM A569 steel, Yellow zinc
B-LINE
$130.64
$108.01
B-Line Eaton series runway wall angle support kit, Use to secure cable runway to a wall, Includes angle bracket, J Bolts and 5?16-18 hardware, Runway
Model: BLN-SB211330YZ
Eaton B-Line series runway wall angle support kit, Use to secure cable runway to a wall, Includes angle bracket, J Bolts and 5?16-18 hardware, Runway wall angle support kit, Yellow zinc
B-LINE
$214.10
B-Line Eaton series runway wall angle support kit, Used to secure cable runway to a wall, Includes angle bracket,J Bolts and 5?16-18 hardware, Runway
Model: BLN-SB211336FB
Eaton B-Line series runway wall angle support kit, Used to secure cable runway to a wall, Includes angle bracket,J Bolts and 5?16-18 hardware, Runway wall angle support kit, Flat black powder coat
B-LINE
$244.97
B-Line Eaton series runway wall angle support kit, Used to secure cable runway to a wall, Includes angle bracket, J Bolts and 5?16-18 hardware, Runway
Model: BLN-SB211315FB
Eaton B-Line series runway wall angle support kit, Used to secure cable runway to a wall, Includes angle bracket, J Bolts and 5?16-18 hardware, Runway wall angle support kit, 6 gauge, Flat black...
B-LINE
$159.61
$148.53
B-Line Eaton series runway wall angle support kit, Used to secure cable runway to wall, Includes angle bracket, J bolts and 5?16-18 hardware, Runway w
Model: BLN-SB211306FB
Eaton B-Line series runway wall angle support kit, Used to secure cable runway to wall, Includes angle bracket, J bolts and 5?16-18 hardware, Runway wall angle support kit, 6 gauge, A569 steel, Flat...
B-LINE
$134.29
$113.80
Eaton B-Line series runway wall angle support kit, Used to secure cable runway to a wall, Includes angle bracket, J Bolts and 5?16-18 hardware, Runway wall angle support kit, 6 gauge, ASTM A569 steel, Yellow zinc
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Material Details:
- Yellow zinc ASTM A569 steel
- Product Height:
- 1.63 in
- Product Length Depth:
- 1.63 in
- Product Weight:
- 10.8 lb
- Product Width:
- 37.13 in
- Special Features:
- Includes angle bracket, J Bolts & 5⁄16-18 hardware
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Runway wall angle support kit
- Product Details:
- Runway wall angle support kit
- Product Length:
- 1.63 in
- Application:
- Used to secure cable runway to a wall
B-LINE SB211336YZ – Frequently Asked Questions
1) What does the B-Line SB211336YZ wall angle support kit come with, or do I need to buy bolts separately?
The kit ships complete for one wall attachment point: the angle bracket, J bolts, and 5/16-18 hardware are all included. You supply only the wall anchors suited to your substrate, since concrete, block, and stud walls each need a different fastener.
2) Is a wall angle the right way to support cable runway, or should I use threaded rod from the ceiling?
A wall angle like the SB211336YZ carries the runway off a structural wall and is the simplest choice where runway terminates at or runs along a wall, such as entering a telecom room or dead-ending at a rack lineup. Where runway crosses open ceiling space away from walls, that run needs overhead support from the deck instead. Many installs use both: wall angle at the terminations, overhead support in the middle of the run.
3) Can the B-Line SB211336YZ be installed in a damp or unconditioned space like a parking garage or warehouse?
It is 6 gauge ASTM A569 steel with a yellow zinc finish, which handles indoor and sheltered unconditioned areas. Yellow zinc is a mild corrosion coating, not a marine or exterior-exposure finish, so for wash-down, coastal, or fully outdoor locations specify a hot dip galvanized wall angle instead.
4) Is this B-Line runway wall support UL Listed for a data center or institutional spec?
Yes, the SB211336YZ runway wall angle support kit is UL Listed, which is what most institutional and data center specs call for on cable support components. It carries the Eaton B-Line name for submittal purposes.
5) How much clearance does the SB211336YZ bracket take off the wall?
The angle's leg dimensions are 1.63 inches by 1.63 inches, so the bracket itself projects only about an inch and a half from the wall face before the runway sits on it. Plan cable bend radius and any wall-mounted equipment clearance around the runway depth, not the bracket.
6) What part number should I order for a B-Line runway wall angle support kit in yellow zinc?
Order Eaton B-Line SB211336YZ. The YZ suffix is the yellow zinc finish, and it ships as a single kit with the bracket and J bolt hardware together.
How fast can I get the B-LINE SB211336YZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB211336YZ come with a warranty?
Absolutely. The B-LINE SB211336YZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB211336YZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB211336YZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.