B-Line Eaton series single met...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6,448.19
Image coming soon

B-Line Eaton series single meter sockets, 100 A, Test block, Ring type, 3R, ANSI 61 gray painted, #14-2/0, #14-2/0, Steel, Flush mount, 7 jaws, 1 posi

(No reviews yet) Write a Review

Model: 125 TB

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6,448.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series single meter sockets, 100 A, Test block, Ring type, 3R, ANSI 61 gray painted, #14-2/0, #14-2/0, Steel, Flush mount, 7 jaws, 1 position, 3Ø/4W, Overhead and underground feed

Manufacturer Resources

Product Specs

Amperage Rating:
200A
Bypass:
Test block
Certifications:
UL
Compliances:
EUSERC Approved
Cover Door Type:
Ring
Degree Of Protection:
3R
Line Lug Size:
#6-250 MCM
Load Lug Size:
#6-250 MCM
Mounting Method:
Surface mount
Number Of Jaws:
5
Number Of Positions:
1
Number Of Wires:
1Ø/3W
Product Height:
30 in
Product Length Depth:
6 in
Product Weight:
34 lb
Product Width:
14 in
Special Features:
Overhead and underground feed
Department:
Electrical
Product Finish:
ANSI 61 gray paint
Product Material:
Galvanized steel

B-LINE 125 TB – Frequently Asked Questions

1) Can the B-Line 125 TB meter socket be installed outdoors?
Yes. The B-Line Eaton series 125 TB meter socket carries a 3R enclosure rating, so it is built for outdoor use where rain and falling debris are the concern. The enclosure is finished in ANSI 61 gray paint, the standard utility gray for exterior service equipment.
2) What size service conductors will land in the B-Line 125 TB meter socket?
Both line and load terminals on the 125 TB socket take #6 through 250 MCM. That covers typical copper or aluminum residential and light commercial service entrance conductors without needing reducers, and it is the same range on both sides so you are not sizing line and load differently.
3) Is the B-Line 125 TB meter socket a ringless or ring type unit?
Ring type. The meter cover is retained by a sealing ring rather than a ringless cover with a hinged door, so the utility seals the ring. Many utilities specify one or the other, so verify with the serving utility which style they accept before you set the can, since ring and ringless covers are not interchangeable.
4) Is the B-Line 125 TB meter socket UL listed and EUSERC approved?
Both. The socket is UL listed and EUSERC approved, which is the approval Western utilities commonly require on service equipment before they will set a meter. Institutional and utility-spec jobs that call out EUSERC compliance are covered by this unit.
5) Does this Eaton B-Line meter socket work for both overhead and underground service?
It does. The 125 TB is built for overhead and underground feed, so the same socket can be used whether the utility drop comes in from a weatherhead above or a lateral from below. That matters on tract work where you want one socket part number across both feed conditions.
6) Does this meter socket have a bypass for pulling the meter under load?
It uses a test block bypass. That gives the utility a means to jumper line to load so the meter can be changed or tested without dropping service to the customer. It is a single position socket, meaning one meter per enclosure.
7) How much wall space do I need for the B-Line 125 TB meter socket?
Plan for an enclosure measuring 30 in high, 14 in wide and 6 in deep. It weighs 34 lb, so it is a two-hand set on a wall but a one-man install. Allow the working clearance your local code requires in front of the meter and room for the conduit hub or bushing above or below depending on feed direction.
How fast can I get the B-LINE 125 TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 125 TB come with a warranty?
Absolutely. The B-LINE 125 TB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 125 TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 125 TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!